BMS
Compact extension mower for narrow track tractors or compact tractors
Hydraulic compact boom arm for small tractors and narrow gauge tractors or compact tractors.
The BMS boom is factory equipped with a friction-reduced multi lever Bowden cable control system.
Additional boom mowers on request!
Dimensions
| BMS | 3430 | 3530 Front | 4330 |
| A = m | 3,40 | 3,50 | 4,30 |
| B = m | 3,00 | 2,85 | 4,10 |
| C= m | 3,80 | 3,85 | 4,20 |
| D = m | 2,00 | 2,00 | 2,55 |
Optional:
Single-lever electro-proportional control – excellently suited for installation in the tractor cab.
The single-lever joystick control system gives the operator the possibility of controlling the height and the length of the boom arm with one lever. At least two cylinders can be activated simultaneously and variably. Thus precise and uniform control of the arm is provided.
Optimal construction:
Through the arrangement for the BMS 3530 Front, the view is unobstructed during operation. Combined with the sliding mulching head, a reach of 3.50 m is achieved.
Good overview:
To enable a better view of the implement for the operator, the BMS 3430 and BMS 4330 (option) can be delivered mounted in front – three-point Cat. I / II. A high top link attachment point permits work close to the tractor and above obstacles.
Work facilitation:
A mechanical parallel guide of the boom arm offloads the operator: If there is a change in boom length the position of the implement remains unchanged.
Optional:
Lopper – equipped with guide fingers and serrated lower cutter for a clean cut. Particularly well- suited for trimming to Ø 30 mm.
Well proven range of use
- Mulching of grass
- Ditches and embankments
- Roadside plantings
- Wayside maintenance
- Area management and landscape management
- Municipal implementation
- Hedge maintenance
Basic equipment
- Attachment: rear or front possible
- 3-point rear mounting cat. I or II
- Right working–left working can also be ordered
- Stabilisation kit for 3-point
- Tractor independent hydraulic system
- Hydraulic collision protection
- Mechanical parallel guide
- Attachment for tool (e.g.pruning shears)
- Floating position extension
- Floating position mulching head
- Multiple lever bowden cable operation–length of cable: rear mounting 2 m, front mounting 3.20 m
- Driveshaft
- Including obstruction safeguard
Accessories / special equipment
- Delivery without hydraulic system or without operating unit possible
- Single lever electronic proportional control including electrical on/off of the device
- Pruning shears, working width 1.48 m or 1.95 m
- Flow divider for pruning shears (on machines from 60 l/min oil control)
- Fast-changer–boom side
- Fast-changer–implement side (mulcher / tree topper)
Technical data
Max. horizontal display: 3,40 m
Pumping capacity: 46 l / m
Working pressure: 210 bar
Oil tank volume: 66 l
Power requirement*. kW/hp: 18 / 25
Rpm of PTO: 540 or 1.000
Weight**: approx. 330 kg
Weight: at least 1.200 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
Max. horizontal display: 3,50 m
Pumping capacity: 46 l / m
Working pressure: 210 bar
Oil tank volume: 66 l
Power requirement*. kW/hp: 18 / 25
Rpm of PTO: 540 or 1.000
Weight**: approx. 350 kg
Weight: at least 1.750 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
Max. horizontal display: 4,30 m
Pumping capacity: 46 l / m
Working pressure: 210 bar
Oil tank volume: 66 l
Power requirement*. kW/hp: 33 / 45
Rpm of PTO: 540 or 1.000
Weight**: approx. 430 kg
Weight: at least 1.900 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
