KM
Flat drive – Strong performance for mulching and wood shredding

The KM flail mulcher is designed for universal use.
The extremely flat design
and the lowered drive are ideal for the use in fruit growing.
The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.
As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.
Fig. with special equipment – sawn timber clearer with lift-out



KM with mounted swivel disc.

KM with mounting and shredding device to shred prunings.
Well proven range of use
- In orchards and vineyards
- In pasture and land maintenance
- Landscape maintenance
- Mulching of roadside vegetation
- Alongside paths and roads
- In sports facilities and parkways
- For lawn maintenance at airports and on fallows
- In strawberry orchards and forestry
- For shredding prunings
- Mulching of corn stover
Basic equipment
- Mounting: front
- Flat drive in front mounting
- High-quality angular gear with two running wheels: robust, flexible drive over enhanced V-belt on the rotor shaft, automatic belt tensioning
- Gearbox independent of direction of rotation only for 540 rpm or 1,000 rpm
- Self-cleaning roller with large spherical rollerbearings, drive roll diameter 170 mm
- At the ends of conical shaped rear roller for a smooth cornering
- Cutting height adjustment on rear roller and top link, roller height-adjustable
- Serrated counter-cutter in the housing to increase the degree of defibration and reduction of the mulch mass
- Manual 3-point parallelogram-side adjustment – adjustment 41 cm
- Rotor tube diameter 140 mm
- Low V-belt drive sidewise
Accessories / special equipment
- PTO
- Set of skids
- Hydraulic side adjustment for mulcher / 42 cm adjustment track
- Attachment plate for rubber shred rotor, adjustable incline
- Support frame OB II single-sided (right) with hydraulic lift-out
- Rubber shred rotor / inter-row cutter
- Support frame OB II with hydraulic lift system (two-sided)
- Rubber shred rotor with holder for front mounting
- Wear plates
Technical data
„Y“-type blades: 48 pcs
System flail: 12 pcs
Working width: 1,55 m
Overall width: 1,70 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,18 m
Power requirement* min. kW/hp: 22/30
Rpm of PTO: 540,750 or 1.000 U/min
Weight**: approx. 620 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
„Y“-type blades: 54 pcs
System flail: 14 pcs
Working width: 1,80 m
Overall width: 1,95 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,32 m
Power requirement* min. kW/hp: 25/35
Rpm of PTO: 540,750 or 1.000 U/min
Weight**: approx. 630 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
„Y“-type blades: 60 pcs
System flail: 16 pcs
Working width: 2,00 m
Overall width: 2,15 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,42 m
Power requirement* min. kW/hp: 29/40
Rpm of PTO: 540,750 or 1.000 U/min
Weight**: approx. 640 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
„Y“-type blades: 66 pcs
System flail: 16 pcs
Working width: 2,20 m
Overall width: 2,35 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,52 m
Power requirement* min. kW/hp: 37/50
Rpm of PTO: 540,750 or 1.000 U/min
Weight**: approx. 690 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment

The row cleaner
The row cleaner can be mounted at the KM flail mulcher to clean away scrub. Front and rear mounting possible.

3-point frame for rear mounting (rigid)