KM
Strong performance for mulching and wood shredding
The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.
As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.
Fig. with special equipment
KM with mounted swivel disk.
KM mounting and shredding device to shred prunings.
Well proven range of use
- In orchards and vineyards
- In pasture and land maintenance
- Landscape maintenance
- Mulching of roadside vegetation
- Alongside paths and roads
- In sports facilities and parkways
- For lawn maintenance at airports and on fallows
- In forest plantations
- For shredding prunings
- In berry orchards
Basic equipment
- Mounting: rear
- High-quality angular gear:robust, flexible drive over enhanced V-belt on the rotor shaft, automatic belt tensioning
- Self-cleaning roller with large spherical roller bearings,drive roll diameter 170 mm
- At the ends of conical shaped rear roller for a smooth cornering
- Cutting height adjustment on rear roller and top link, roller height-adjustable
- Serrated counter-cutter in the housing to increase the degree of defibration and reduction of the mulch mass
- Manual 3-point parallelogram-side adjustment – adjustment 40 cm
- Rotor tube diameter 140 mm
Accessories / special equipment
- PTO/PTO with free wheel
- Set of skids
- Hydraulic side adjustment for mulcher / 42 cm adjustment track
- Central gear (KM180/200/220)
- Rubber shred rotor/ inter-row cutter with holder for mulcher, rear attachment
- Swivel disc with motor (without hydraulic hoses, required oil feed 20 – 25 l/min.), outreach from side plate of the mulcher 53 cm, working width 68 cm, 75 kg
- Wear plates
Technical data
“Y”-type blades: 42 pcs
System flail: 10 pcs
Working width: 1,35 m
Overall width: 1,47 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 0,98 m
Power requirement* min. kW/hp: 18/25
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 460 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
*** KM 135 / 145 with 2-groove V-belt drive
**** central gear
“Y”-type blades: 44 pcs
System flail: 12 pcs
Working width: 1,45 m
Overall width: 1,56 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,07 m
Power requirement* min. kW/hp: 20/27
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 480 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
*** KM 135 / 145 with 2-groove V-belt drive
**** central gear
“Y”-type blades: 48 pcs
System flail: 12 pcs
Working width: 1,55 m
Overall width: 1,70 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,16 m
Power requirement* min. kW/hp: 22/30
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 500 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
**** central gear
“Y”-type blades: 54 pcs
System flail: 14 pcs
Working width: 1,80 m
Overall width: 1,95 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,40 m (1,12 m****)
Power requirement* min. kW/hp: 25/35
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 550 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
**** central gear
“Y”-type blades: 60 pcs
System flail: 16 pcs
Working width: 2,00 m
Overall width: 2,15 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,54 m (1,20 m****)
Power requirement* min. kW/hp: 29/40
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 580 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
**** central gear
“Y”-type blades: 66 pcs
System flail: 16 pcs
Working width: 2,20 m
Overall width: 2,35 m
Housing height drive side: 571 mm
Housing height offset side: 487 mm
Max. lateral offset from tractor centre to the left: 1,74 m (1,32 m****)
Power requirement* min. kW/hp: 37/50
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 630 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
**** central gear
“Y“-type blades
claw blade
fine-cutting blade
universal flail
Click on the picture of the blade for more details
The wing
For mulching in tree rows a wing can be mounted at the side.
