PME
Heavy model for mulching and wood shredding
The PME flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. A use at the front or rear is possible without any effort. The serial 3-point linear sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings. As the PME is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.
Well proven range of use
- In orchards and vineyards
- In pasture and land maintenance
- Landscape maintenance
- Mulching of roadside vegetation
- Alongside paths and roads
- In sports facilities and parkways
- For lawn maintenance at airports and on fallows
- In strawberry orchards and forestry
- For shredding prunings
- Mulching of corn stover
Basic equipment
- Mounting: front and rear
- High-quality angular gear with two running wheels: robust, flexible drive over enhanced V-belt on the rotor shaft, automatic belt tensioning
- Gearbox independent of direction of rotation only for 540 rpm or 1,000 rpm
- Self-cleaning roller with large spherical roller bearings, drive roll diameter 170 mm
- At the ends of conical shaped rear roller for a smooth cornering
- Cutting height adjustment on rear roller and top link, roller height-adjustable
- Serrated counter-cutter in the housing to increase the degree of defibration and reduction of the mulch mass
- Hydraulic side adjustment – adjustment 40 cm
- Rotor tube diameter 140 mm
- Low V-belt drive sidewise
Accessories / special equipment
- PTO
- Support frame OB II one-sided (to the right) with hydraulic lifting
- Support frame OB II with hydraulic lifting (two-sided)
- Rubber shred rotor / row cleaner
- Wear plate
Technical data
“Y”-type blades: 48 pcs
System flail: 12 pcs
Working width: 1.55 m
Overall width: 1.74 m
Housing height drive side: 594 mm
Housing height offset side: 517 mm
Max. lateral offset from tractor centre to the left: 1.06 m
Power requirement* min. kW/hp: 25/35
Rpm of PTO: 540 or 1,000 U/min – depending on equipment
Weight**: approx. 660 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
“Y”-type blades: 54 pcs
System flail: 14 pcs
Working width: 1,80 m
Overall width: 1,98 m
Housing height drive side: 594 mm
Housing height offset side: 517 mm
Max. lateral offset from tractor centre to the left: 1,30 m
Power requirement* min. kW/hp: 25/35
Rpm of PTO: 540 or 1,000 U/min – depending on equipment
Weight**: approx. 720 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
“Y”-type blades: 60 pcs
System flail: 16 pcs
Working width: 2,00 m
Overall width: 2,18 m
Housing height drive side: 594 mm
Housing height offset side: 517 mm
Max. lateral offset from tractor centre to the left: 1,40 m
Power requirement* min. kW/hp: 29/40
Rpm of PTO: 540 or 1,000 U/min – depending on equipment
Weight**: approx. 780 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
“Y”-type blades: 66 pcs
System flail: 16 pcs
Working width: 2,20 m
Overall width: 2,38 m
Housing height drive side: 594 mm
Housing height offset side: 517 mm
Max. lateral offset from tractor centre to the left: 1,50 m
Power requirement* min. kW/hp: 37/50
Rpm of PTO: 540 or 1,000 U/min – depending on equipment
Weight**: approx. 830 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
“Y“-type blades
claw blade
fine-cutting blade
universal flail
Click on the picture of the blade for more details
