PMF
For tractors from 37 kW / 50 hp
Heavy model for tractors up to 150 kW / 200 hp

The PMF has a newly-designed three-point bracket with linear lateral adjustment, which enables a high lateral thrust of up to 63 cm. The new three-point bracket receptacle can be used for front and/or rear attachment. An extensive offering of optional special accessories, such as drop flaps made of Hardox steel, is provided for the machine. The machine is factory-equipped with skids. The skids stabilise the machine in motion and prevent the rotor shafts from penetrating too deeply into the soil. The working width of the powerful PMF humus mulcher is between 2.20 meters and 3.20 meters, and depending on the model the PMF humus mulchers are suitable for tractors from 50 hp up to 200 hp.
Fig. with special equipment

Well proven range of use
- In pasture and land maintenance
- Mulching of roadside vegetation
- In sports facilities and parkways
- In strawberry orchards and forestry
- Mowing of lawns
- For lawn maintenance at airports and on fallows
- Landscape maintenance
- For shredding prunings, scrub and undergrowth
- Mulching of corn stover
Basic equipment
- Width of tray of mulch behind the roller
- Gearbox with free wheel
- High-quality bevel gear: Robust, flexible drive over enhanced V-belt on the rotor shaft, automatic V-belt tensioning
- Self-cleaning roller with large storage and floor-friendly guide to the rounded ends and vertical adjustment of the mulcher
- Adjustable cutting height of 3 to 15 cm at the rear roller
- Serrated counter-cutter in the housing to increase the degree of defibration and reduction of the mulch mass
- Two support legs
- Large track roller Ø 244 mm
- Rotor tube diameter 168 mm / PMF 320 = 244 mm
- Double bracket on both sides for front and rear attachment with linear hydraulic lateral adjustment – adjustment distance 63 cm
Accessories / special equipment
- PTO
- Lateral stagelesss adjustable wheels instead of roller
- Hour meter Gearbox independent of direction of rotation
- Balancing device: 2 x chains, 2 x springs
- Chain screen instead of metal flaps
- Additional stone guard (rubber) in front
- Additional stone guard (rubber) for rear area
- V-Belt protection plate / reinforcement
- Wear plates up to 2.2 m working width
- Wear plates from 2.2 m working width
- Lighting equipment
- Metal flaps of Hardox® wear plate, surcharge up to working width 2,4 m
- Metal flaps aus Hardox® wear plate, surcharge up to working width 2,78 m
Technical data
„Y“-type blades: 66 pcs.
System flail: 16 pcs.
Working width: 2.20 m
Overall width: 2.39 m
Housing height drive side: 905 mm
Housing height offset side: 539 mm
Max. lateral offset from tractor centre to the left: 1.62 m
Power requirement* min. kW/hp: 37/50
Rpm of PTO: 540, 750 or 1,000 U/min
Weight**: approx. 988 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
„Y“-type blades: 72 pcs.
System flail: 20 pcs.
Working width: 2.40 m
Overall width: 2.62 m
Housing height drive side: 905 mm
Housing height offset side: 539 mm
Max. lateral offset from tractor centre to the left: 1.79 m
Power requirement* min. kW/hp: 44/60
Rpm of PTO: 540,750 or 1,000 U/min
Weight**: approx. 1,088 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
„Y“-type blades: 72 pcs.
System flail: 20 pcs.
Working width: 2.60 m
Overall width: 2.82 m
Housing height drive side: 905 mm
Housing height offset side: 539 mm
Max. lateral offset from tractor centre to the left: 1.97 m
Power requirement* min. kW/hp: 44/60
Rpm of PTO: 540,750 or 1,000 U/min
Weight**: approx. 1,148 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
„Y“-type blades: 84 pcs.
System flail: 24 pcs.
Working width: 2.78 m
Overall width: 3.00 m
Housing height drive side: 905 mm
Housing height offset side: 539 mm
Max. lateral offset from tractor centre to the left: 2.06 m
Power requirement* min. kW/hp: 56/75
Rpm of PTO: 540, 750 or 1.000 U/min
Weight**: approx. 1,195 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
„Y“-type blades: 96 pcs.
System flail: 28 pcs.
Working width: 3.20 m
Overall width: 3.42 m
Housing height drive side: 977 mm
Housing height offset side: 627 mm
Max. lateral offset from tractor centre to the left: 2.24 m
Power requirement* min. kW/hp: 66/90
Rpm of PTO: 540, 750 or 1,000 U/min
Weight**: approx. 1,428 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment

Lateral stageless adjustable wheels instead of roller

Chain screen instead of metal flaps

Hour meter

Additional stone guard (rubber) in front

Gearbox independent of direction of rotation

Additional stone guard (rubber) for rear area

Balancing device: 2 x chains, 2 x springs