SM
With PTO drive – Especially suitable for front mounting on all municipal and small tractors

The humus SM is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all municipal vehicles and special tractors. Beyond that the SMK/H / SMH can still be used after a vehicle change with its flexible mounting system.








Well proven range of use
- In horticulture
- In berry orchards
- In nurseries
- In sports facilities and parkways
- For lawn maintenance at airports and on fallows
- In pasture and land maintenance
- Landscape maintenance
- Mulching of roadside vegetation
Basic equipment
-
- Mounting: front or rear
- Housing with system angle for quick installation on the carrier vehicle
- Set of skids
- Rear roller adjustment for good soil management and precise cutting height
- Transmission with drive-through and pivoting
- Attachment variants included
- Large tray of mulch behind the roller
- Overload protection by flexible V-belt drive
Attachment variants SM:
- Adjustable coupling triangle suitable for Cat. I carrier vehicle
- Attachment: Kubota F-Series
- Attachment: John Deere F-Series, Shibaura, Husqvarna PT, Iseki SF-Series
- Attachment: Three-point Cat. I or II
Accessories / special equipment
- Hydraulic maintenance cover in front
- PTO without free wheel up to 1,000 rpm
- PTO balanced without overrunning clutch for PTO speed over 1,000 rpm
- Spring kit for strain relief
- Set of wheels, wheel diameter 300 x 100 mm
- Set of foam-filled wheels, wheel diameter 300 x 100 mm
- Hydraulic side shift / 28 cm adjustment track – only front mounting, 3-point possible and up to 1,000 rpm – available
from SM 105 - Hydraulic lateral adjustment in conjunction with parallelogram adjustment (Only for front or rear attachment in Cat. I and II) / adjustment distance approx. 40 cm (from SM 145 possible)
- Mechanical lateral adjustment in conjunction with parallelogram
Attachment variants SM

Adjustable coupling triangle suitable for Cat. I carrier vehicle

Attachment: Kubota F-Series

Adjustable coupling triangle suitable for Cat. I carrier vehicle

Attachment: Kubota F-Series
Technical data
Small flails/Fine edge blade: 14 pcs
Safety Mulcher: 12 pcs
Working widht: 0,85 m
Overall widht 0,95 m
Housing height: 0,33 m
Power requirement* min. kW/hp: 8/11
Rpm of PTO: 540,1.000 or 2.000 U/min or other speeds on request
Weight**:approx. 144 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Small flails/Fine edge blade: 18 pcs
Safety Mulcher: 15 pcs
Working widht: 1,05 m
Overall widht 1,15 m
Housing height: 0,33 m
Power requirement* min. kW/hp: 12/16
Rpm of PTO: 540,1.000 or 2.000 U/min or other speeds on request
Weight**:approx. 160 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Small flails/Fine edge blade: 24 pcs
Safety Mulcher: 18 pcs
Working widht: 1,25 m
Overall widht 1,35 m
Housing height: 0,33 m
Power requirement* min. kW/hp: 17/23
Rpm of PTO: 540,1.000 or 2.000 U/min or other speeds on request
Weight**:approx. 180 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Small flails/Fine edge blade: 28 pcs
Safety Mulcher: 21 pcs
Working widht: 1,45 m
Overall widht 1,55 m
Housing height: 0,33 m
Power requirement* min. kW/hp: 22/30
Rpm of PTO: 540,1.000 or 2.000 U/min or other speeds on request
Weight**:approx. 220 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Small flails/Fine edge blade: 30 pcs
Safety Mulcher: 24 pcs
Working widht: 1,55 m
Overall widht 1,65 m
Housing height: 0,33 m
Power requirement* min. kW/hp: 26/34
Rpm of PTO: 540,1.000 or 2.000 U/min or other speeds on request
Weight**:approx. 240 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Safety Mulcher: 27 pcs
Working widht: 1,75 m
Overall widht 1,85 m
Housing height: 0,33 m
Power requirement* min. kW/hp: 28/38
Rpm of PTO: 540,1.000 or 2.000 U/min or other speeds on request
Weight**:approx. 285 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
The humus flail mulcher SM is equipped with small flails, fine-cutting blades or Safety cutters. All cutting systems ensure a clean and good cut and prove themselves when shredding shrubbery. The Safety cutters prevent ejection of rocks and other foreign objects.
Click on the picture of the blade for more details
Colour selection…
RAL 3000

RAL 2011

Special equipment SM

Hydraulic side shift / 28 cm adjustment track – only front mounting, 3-point possible and up to 1,000 rpm – available from SM 105

Hydraulic lateral adjustment in conjunction with parallelogram adjustment (Only for front or rear attachment in Cat. I and II)
/ adjustment distance approx. 40 cm (from SM 145 possible)
Mechanical lateral adjustment in conjunction with parallelogram