Type A
Flail mulcher for large areas
optinal
The front flail mulcher Type A is designed that it can be mounted to almost all special tractors.
Apart from the capability with landscape care in municipal use, due to its stability the Type A model offers excellent requirements for mulching in lopes, in agriculture and forestry as well as in fruit-growing and viticulture.
Fig. with rigid mounting
Fig. with hydraulic sideshift adjustment and parallelogram adjustment
Well proven range of use
- In orchards and vineyards
- In horticulture
- Landscape maintenance
- In berry orchards
- In nurseries
- In sports facilities and parkways
- For lawn maintenance at airports and on fallows
- Mulching of roadside vegetation
Basic equipment
- Mounting: front and/or rear
- Width spread of mulched material behind the roller
- Made of high quality fine grain steel with extremely high stability
- Gearbox with overrunning clutch. High-quality bevel gear:Robust, flexible drive via enhanced V-belt on the rotor shaft, automatic V-belt tensioning
- Large-diameter rotor shaft with solid pendulum roller bearing–rotor tube diameter 140 mm
- Self-cleaning roller with large spherical roller bearing
- Rear roller with slightly conical shaped ends for a smooth cornering
- Height-adjustable skids on the sideparts
- Large diameter of roller 170 mm
- Depending on the type of tractor: rigid suspension or mechanical 3-point parallelogram sideshift adjustment
Accessories / special equipment
- PTO/PTO with star profile
- Hydraulic cylinder for side shift / 42 cm adjustment track
- Two-sided three point frame for front and rear mounting (only possible with parallelogram sideshift adjustment)
- Gearbox in dependent of rotation direction
- Wear plates
Technical data
“Y”-type blades: 48 pcs
System flail: 12 pcs
Safety Mulcher: 18 pcs
Working widht: 1,55 m
Overall widht 1,74 m
Max. lateral offset with parallelogram mounting: 1,08 m
Power requirement* min. kW/hp: 26/34
Rpm of PTO: 540,750 or 1.000 U/min or other speeds on request
Weight** rigid attachment: approx. 480 kg
with parallelogram adjustment: approx. 500 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
“Y”-type blades: 54 pcs
System flail: 14 pcs
Safety Mulcher: 21 pcs
Working widht: 1,80 m
Overall widht 1,98 m
Max. lateral offset with parallelogram mounting: 1,33 m
Power requirement* min. kW/hp: 30/40
Rpm of PTO: 540,750 or 1.000 U/min
Weight** rigid attachment: approx. 510 kg
with parallelogram adjustment: approx. 560 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
“Y”-type blades: 60 pcs
System flail: 16 pcs
Safety Mulcher: 24 pcs
Working widht: 2,00 m
Overall widht 2,18 m
Max. lateral offset with parallelogram mounting: 1,50 m
Power requirement* min. kW/hp: 36/48
Rpm of PTO: 540,750 or 1.000 U/min
Weight** rigid attachment: approx. 560 kg
with parallelogram adjustment: approx. 610 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
“Y”-type blades: 66 pcs
System flail: 16 pcs
Safety Mulcher: 26 pcs
Working widht: 2,20 m
Overall widht 1,38 m
Max. lateral offset with parallelogram mounting: 1,55 m
Power requirement* min. kW/hp: 44/60
Rpm of PTO: 540,750 or 1.000 U/min
Weight** rigid attachment: approx. 580 kg
with parallelogram adjustment: approx. 635 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
“Y“-type blades
claw blade
fine-cutting blade
Universal flail
Click on the picture of the blade for more details
Colour selection…
RAL 3000
Optional: available with hydraulic sideshift adjustment and parallelogram adjustment.
We provide customised add-on components for…
- Holder
- Fendt
- BCS
- AEBI
- DE-Pietri
- Tremo
- Rasant
- Pasquali
- Reformtrak
- Carraro
