WMH
With hydraulic drive, especially suitable for mounting on all compact tractors, special tractors, wheel loaders, mini excavators, municipal vehicles and extension mowers
The WMH hydraulic mulching head is designed for universal use. It has a compact and low design and, with its hydraulic drive, is particularly well-suited for attachment on all special tractors, wheel loaders, mini-excavators, municipal vehicles and extension mowers.
In addition, a variable attachment system enables easy continued use of the mulcher if there is a vehicle change. Serrated counter-cutters in the housing increase the degree of shredding of the mulch mass and thus achieve optimum working results.
Well proven range of use
- in orchards and vineyards
- in horticulture
- in berry plantations
- in nurseries
- in sports facilities and parkways
- fallows
- in landscape maintenance
- to shred prunings
- in municipal use
Basic equipment
- Mounting: front, rear and extension
- Housing with system angle for quick installation on the carrier vehicle
- Robust, flexible drive via enhanced V-belt on the rotor shaft, automatic V-belt tensioning
- Rear roller adjustment for good soil management and precise cutting height
- Self-cleaning roller with large storage and floor-friendly guide to the rounded ends and vertical adjustment the mulch machine – at WMH 135 and 145
- Drive roller diameter: 140 mm
- Rotor tube diameter: 102 mm
- Serrated counter-cutter in the housing to increase the degree of defibration and reduction of the mulch mass
- Housing height: flat drive 602 mm, high drive 743 mm
- Housing height on the discharge side 487 mm
- Matching gear motor (oil motor) for the delivery rate (oil) of the carrier vehicle
Accessories / special equipment
- Height adjustment H 240 / 240 mm adjustment, 43 kg
- Height adjustment H 240 P / 240 mm adjustment with pendulum balance, 63 kg
- Rotor brake valve including feeder valve
- Feeder valve
- Rotor brake valve with pressure relief valve, speed limiter, including feeder valve
- Axial piston motor (only in connection with leak-oil line)
- Mounting for fork carriage without mounting hook
- Euro mounting
- Hydraulic side shift in connection with parallelogram shift (only for front or rear mounting) / adjustment way approx. 40 cm (possible from WMH 125); Mechanical lateral adjustment (only for front or rear mounting)
- Set of skids
- 3-point linkage
- Universal mounting
- Robocut mounting without swivel
- Skid-Steer mounting
- Energreen mounting
- Euro mounting
Technical data
Small flails / Fine edge blade: 14 pcs.
Safety-Mulcher: 12 pcs.
Working width: 0,85 m
Overall width: 0,95 m
Housing height: 0,33 m
Power requirement* from kW/hp: 8/11
Oil motors: 25-130 l
Weight**: approx. 120 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
Small flails / Fine edge blade: 18 pcs.
Safety-Mulcher: 15 pcs.
Working width: 1,05 m
Overall width: 1,15 m
Housing height: 0,33 m
Power requirement* from kW/hp: 12/16
Oil motors: 25-130 l
Weight**: approx. 140 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
Small flails / Fine edge blade: 24 pcs.
Safety-Mulcher: 18 pcs.
Working width: 1,25 m
Overall width: 1,35 m
Housing height: 0,33 m
Power requirement* from kW/hp: 17/23
Oil motors: 25-130 l
Weight**: approx. 155 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
Small flails / Fine edge blade: 28 pcs.
Safety-Mulcher: 21 pcs.
Working width: 1,45 m
Overall width: 1,55 m
Housing height: 0,33 m
Power requirement* from kW/hp: 22/30
Oil motors: 25-130 l
Weight**: approx. 180 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
Small flails / Fine edge blade: 30 pcs.
Safety-Mulcher: 24 pcs.
Working width: 1,55 m
Overall width: 1,65 m
Housing height: 0,33 m
Power requirement* from kW/hp: 26/36
Oil motors: 25-130 l
Weight**: approx. 205 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
Safety-Mulcher: 27 pcs.
Working width: 1,75 m
Overall width: 1,85 m
Housing height: 0,33 m
Power requirement* from kW/hp: 28/38
Oil motors: 25-130 l
Weight**: approx. 285 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
Safety-Mulcher: 27 pcs.
Working width: 1,75 m
Overall width: 1,85 m
Housing height: 0,33 m
Power requirement* from kW/hp: 28/38
Oil motors: 25-130 l
Weight**: approx. 285 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
„Y“-type blades
System flails… with fine-cutting blade or claw blade
Club flails
Click on the picture of the blade for more details
Accessories / Special equipment
Height compensation H 240
Height compensation H 240 P (with swing compensation)
Mounting for fork carriage / Euro mounting
Hydraulic side shift in connection with parallelogram shift (only for front or rear mounting) / adjustment way approx. 40 cm (possible from WMH 125)
Set of skids
3-point linkage
Universal mounting
Robocut mounting without swivel
Skid-Steer mounting
Energreen mounting
Euro mounting
