LV
Extremely compact and very low –
mounted close to the tractor and with linearly adjustable working width
Series LV rotary mulchers have an extremely compact and low design. They are attached close to the tractor. In conjunction with the lower depth, this is advantageous for weight distribution and a small turning radius.
The constant optimisation of the models
has made this mulcher a powerful and versatile partner
in vineyards. The working width can be variably and hydraulically adjusted via
two cylinders! The three cast steel gearboxes and the wear-resistant sheet
steel housing guarantee the familiar humus quality. A clean cutting pattern is achieved due to the two rotary cutters that run in opposite directions with movable, replaceable cutter blades.
With additional attachments multiple functions can be executed in one work step: Inter-row spraying, as well as cultivation in the undervine area with the INTERPLANET tiller head, or mulching in the undervine area with the INTERPLANET mulching head.
Well proven range of use
- Vineyards and orchards
- Managed grassland with fruit tress
- Berry cultures
- Christmas tree cultures
Basic equipment
- Mounting: front or rear
- Low and stable design
- 3-point linkage Cat. I and II
- Large overlap of the knife
- Linear width adjustment via a double-acting hydraulic valve
- Cutting height adjustment
- Rear ball-bearing track roller for optimal running characteristics Tube diameter 170 mm
- Front side wheels, wheel diameter 250 mm, wheel width 90 mm
- High-quality bevel gear
- Accident prevention guards
Accessories / special equipment
- PTO with friction coupling and overrunning clutch
- Front mounting
- PTO for the combination of mulching and spraying work
- Adaptor for mulching/spraying combination
- Hydraulic lateral adjustment/40 cm adjustment track (only possible for rear mounting)
- Band spraying or point spraying
- INTERPLANET tiller head for cultivation or INTERPLANET mulching head
- Tandem roller with wiper instead of normal roller tube diameter 170 mm
- Set of rotating wheels with wheel holder for the central part (possible from LV 145)
- Set of rotating wheels for the side part up to LV 135
- Wheels
- Special gears for tractors with reverse (only for LV 145 – LV 180)
Technical data
Working width: 1,10-1,38 m
Overall width: 1,16-1,44 m
Depth/height: 1,28/0,24 m
Power requirement* from kW/hp: 29/40
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 460 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 1,15-1,48 m
Overall width: 1,21-1,54
Depth/height: 1,28/0,24 m
Power requirement* from kW/hp: 29/40
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 480 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 1,27-169 m
Overall width: 1,33-1,75 m
Depth/height: 1,28/0,24 m
Power requirement* from kW/hp: 29/40
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 500 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 1,35-1,77 m
Overall width: 1,41-1,83 m
Depth/height: 1,28/0,24 m
Power requirement* from kW/hp: 29/40
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 510 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 1,45-1,96 m
Overall width: 1,51-2,02 m
Depth/height: 1,42/0,24 m
Power requirement* from kW/hp: 29/40
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 580 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 1,60-2,16 m
Overall width: 1,66-2,22 m
Depth/height: 1,52/0,24 m
Power requirement* from kW/hp: 33/45
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 640 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 1,79-2,35 m
Overall width: 1,85-2,41 m
Depth/height: 1,61/0,24 m
Power requirement* from kW/hp: 33/45
Rpm of PTO: 540 or 1.000 U/min
Weight**: approx. 650 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Per rotary cutter, two freely-oscillating cutter blades that can be quickly and cost-efficiently replaced are mounted on the cutter carrier. Thanks to the linear working width adjustment a large overlap can be achieved. This results in a precise and clean cutting pattern.
Click on the picture of the blade for more details
The LV rotary mulcher can be variably extended and retracted linearly and adapted to the respective row width. Row width can be adjusted when driving.
Deflecting fenders on the wheel to prevent the vines from being hooked in and damaged.
Additional attachment INTERPLANET tiller head
Additional attachment INTERPLANET mulching head
Additional attachment – inter-row sprayers
Nozzle R + L and holder for band spraying
Front mounting
Add-on adapter for Interplanet per side
Hydraulic lateral adjustment / 40 cm adjustment track (only possible for rear mounting)
Tandem roller with wiper instead of normal roller tube diameter 17 cm; Track roller width: 40 cm
Set of rotating wheels with wheel holder for the central part (possible from LV 145). Track width: 1.50 m; Wheel width: 15 cm; Wheel diameter: 19 cm
Set of rotating wheels for the side part up to LV 135. Wheel width: 15 cm; Wheel diameter: 19 cm
Special gears for tractors with reverse (only for LV 145 – LV 180)
