VO
With solid frame construction – especially designed for use on powerful tractors
VO rotary mulchers have a stable frame construction, designed particularly
for use on powerful tractors and for
the mulch-spray combination.
Within the variable working width adjustment of all VO rotary mulchers any desired position can be freely selected. The working width is variably adjusted from the tractor, hydraulically. Both swing discs can be adjusted synchronously or separately.
Thus the VO rotary mulchers offer an absolutely reliable and economic possibility for mulching the tree strip and implementing organic cultivation. They are built particularly low and have a smooth surface, in order to slide under the fruit-laden boughs.
VO 2500 / VO 2700
with special equipment
VO 3000 / VO 3500
with special equipment
For use in mulch/spray combination, the VO rotary mulcher is factory-equipped with a gearbox through drive. With the floating hitch (rocker arm) the tongue weight of the sprayer is transferred to the tractor.
Well proven range of use
- Orchards
- Managed grassland with fruit tress
- Berry cultures
- Municipal implementation n Photovoltaic systems
- Vineyards
Basic equipment
- Mounting: front or rear
- Large overlap by third rotary blade at VO 3000/3500
- Three point linkage for Cat. I and II mounting
- Twin gearbox with drive shift–for example for spray operation
- Rear tandem roller for best operating characteristics
- Front side twist-off wheels,adjustable on track
- Manual adjustment of working width
- Accident prevention guards
- Hydraulic double-acting cylinders for variable working width adjustment
- Housing height approx. 38 cm*, Swivel arm height approx. 38 cm*, * Depending on the cutting height adjustment
Accessories / special equipment
- PTO/PTO with overrunning clutch
- Front mounting
- Adaptor for mulching/spraying combination
- Hydraulic lateral adjustment
- Control block with double-acting control devices
- Electro-hydraulic precision control of the swing discs
- Collision safeguard for both swing discs
- Hydraulic working width adjustment
- Electrical positioning
- OFF-switchable gearbox
- Two-sided 3-point frame for ront- and rear mounting
- Oil flow regulator / flow dividers, loose
- Oil flow regulator fully installed on the device
– only required for fine control if tractor does not have one
– only required at over 25 l/min. - Electrical positioning (for order no. 4 or 6)
Technical data
Working width: 1,73-2,44 m
Overall width: 1,83-2,54 m
Setting range/ parallelogram: –
Setting range/ linear: 0,40 m
Power requirement* from kW/hp: 37/45
Rpm of PTO: 540, 750 or 1.000 U/min
Weight**: approx. 570 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 1,94-2,72 m
Overall width: 2,03-2,81 m
Setting range/ parallelogram: –
Setting range/ linear: 0,40 m
Power requirement* from kW/hp: 37/45
Rpm of PTO: 540,750 or 1.000 U/min
Weight**: approx. 600 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 2,05-3,07 m
Overall width: 2,13-3,16 m
Setting range/ parallelogram: Rear 0,4 m / Front 0,58 m
Setting range/ linear: –
Power requirement* from kW/hp: 37/45
Rpm of PTO: 540,750 or 1.000 U/min
Weight**: approx. 700 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Working width: 2,26-3,41 m
Overall width: 2,35-3,50 m
Setting range/ parallelogram: Rear 0,40 m / front 0,58 m
Setting range/ linear: –
Power requirement* from kW/hp: 44/60
Rpm of PTO: 540,750 or 1.000 U/min
Weight**: approx. 760 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
The basic implements VO 2500 / VO 2700 is equipped with two rotary cutters; VO 3000 / VO 3500 are equipped with three rotary cutters. Thus a large overlap is achieved, evidenced by an extremely clean cutting pattern. The cutters are mounted on cutter carriers so that the blades can be cost-efficiently replaced.
Click on the picture of the blade for more details
Mit Hilfe der elektro-hydraulischen Feinsteuerung wird mit zwei Fühlern, die den Schwenkarmen vorgelagert sind, die Hindernisse feinfühlig ertastet und die Schwenkscheibe eng um den Baum herumgeführt. So ist ein genaues und schonendes Abtasten und Mulchen nahe am Hindernis, wie Baumstämme, Rebstöcke, Sträucher, Weidezäunen und sogar in Solarparks unter den Solarpanelen möglich. Durch die Feinsteuerung passen sich die Schwenkarme unabhängig voneinander der Zeilenbreite an.
In der serienmäßigen hydraulischen Arbeitsbreiteneinstellung kann das Mulchgerät auf eine, je nach Typ, variable Arbeitsbreite eingestellt werden. Optional wird eine Anfahrsicherung für beide Schwenkscheiben angeboten, welche über ein Überdruckventil ausgelöst wird. So wird im Falle eines Lenkfehlers eine Beschädigung am Hagelnetzpfosten oder an der Pflanze vermieden. Die Anfahrsicherung ist nicht zu verwechseln mit der Feinsteuerung.
With the hydraulic lateral adjustment the VO implements offers easy lateral adjustment on the tractor: VO 2500 / VO 2700 linear adjustment (see illustration to the left) VO 3000 / VO 3500 parallelogram adjustment
VO rotary mulchers move on track wheels with a wide contact area. They can be adjusted in track and height.
The factory standard tandem track roller ensures quiet operation, even at rapid travel.
Under each of the rotary cutters of the swing disc there is a cutter support plate that adapts the swing arm to the terrain.
For the following device functions a single-acting control unit (on the tractor) and a pressure-free rewind or a double acting control unit is required with scanning position.
- Control unit with two double-acting control devices for adjusting the two wings (not necessary, when the tractor has two double-acting control units)
- Collision safety device for both wings (not to be confused with fine control)
- Control unit with two double-acting control devices for adjusting the two wings (not necessary, when the tractor has two double-acting control units)
- Collision safety device for both wings (not to be confused with fine control)
- Control unit with three double-acting control devices for pivoting of the two wings and the hydraulic parallelogram (not necessary, when tractor has three double acting control units)
- Parallelogram-side control hydraulic
- Collision safety device of both wings (not to be confused with fine control)
- Double sided hydraulic fine control with electric remote control
- Two sided hydraulic fine control with electrical remote control, Hydraulic parallelogram side adjustment
