
The SP/SSP side mulchers offer double implementation possibilities: They can be used as rear mulchers directly behind the tractor. With the long parallelogram it is swung to the side next to the tractor to mulch on waysides and roadsides, and for mulching embankments and ditches.
The variable inclination range of 90° upward and 60° downward, as well as the variably adjustable swing ranges enable the greatest possible area of implementation!


Infinitely variable inclination range of the mower head of 90° upward and 60° downward.


Attractive performance in large-area use: Combined with a
front mulcher a total working width of up to 5.40 m is achieved.
Well proven range of use
- Mulching of grass and light wood
- Ditches and embankments
- Roadside plantings, roadsides, edges of fields
- Area management and landscape management
- Municipal implementation
- Green area maintenance for airports and in solar parks
- Large area maintenance combination with front implement to 5.40m working width
Basic equipment
- Mounting: rear–use as a rear or sidemulcher
- Attention: Front attachment with a PTO speed of 540 rpm or hydraulic drive possible
- Inclination up 90o/down 60o
- Check valve to ensure safe positioning of the machine
- Cat. II and III mounting
- Cat. II mounting for dismantling in order to achieve a greater lateral displacement
- High quality angular gearbox with free wheel: robust, flexible drive over enhanced V-belt on the rotor shaft
- Rear roller adjustment for good soil management and precise cutting height
- Mechanical collision safety
- Spherical roller bearings in the rotor shaft
- Two anti-tipping legs
- Adjustable oil flow, in order to regulate restrictors to the pan and tilt cylinders in their movement speed
- Rotor-pipediameter 140 mm
- Self-cleaning roller with large spherical roller bearings, drive roll diameter 170 mm
- Housing height offset side 517 mm
Accessories / special equipment
- Wide angle universal joint shaft with 2 wide angles and crossprofile, 40 kg
- Skid right
- Wear plates
Technical data
“Y”-type blades: 48 pcs.
System flails: 12 pcs.
Safety-Mulcher: 18 pcs.
Working width: 1,56 m
Overall width**: 2,28 m
Power requirement* from kW/hp: 60 / 82
Rpm of PTO: 540 U/min
Weight**: approx. 950 kg
Track of carrier vehicle: 1,80 m
Carrier vehicle: 2.500 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
*** Mulcher in horizontal position
“Y”-type blades: 54 pcs.
System flails: 14 pcs.
Safety-Mulcher: 21 pcs.
Working width: 1,80 m
Overall width**: 2,52 m
Power requirement* from kW/hp: 59/81
Rpm of PTO: 540 U/min
Weight**: approx. 980 kg
Track of carrier vehicle: 1,80 m
Carrier vehicle: 3.000 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
*** Mulcher in horizontal position
“Y”-type blades: 60 pcs.
System flails: 16 pcs.
Safety-Mulcher: 24 pcs.
Working width: 2,00 m
Overall width**: 2,72 m
Power requirement* from kW/hp: 66 / 90
Rpm of PTO: 540 U/min
Weight**: approx. 1.000 kg
Track of carrier vehicle: 2,00 m
Carrier vehicle: 3.400 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
*** Mulcher in horizontal position
“Y”-type blades: 66 pcs.
System flails: 16 pcs.
Safety-Mulcher: 26 pcs.
Working width: 2,20 m
Overall width**: 2,92 m
Power requirement* from kW/hp: 66 / 90
Rpm of PTO: 540 U/min
Weight**: approx. 1.050 kg
Track of carrier vehicle: 2,20 m
Carrier vehicle: 3.400 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
*** Mulcher in horizontal position
“Y”-type blades: 78 pcs.
System flails: 20 pcs.
Working width: 2,40 m
Overall width**: 3,12 m
Power requirement* from kW/hp: 66 / 90
Rpm of PTO: 540 U/min
Weight**: approx. 1.100 kg
Track of carrier vehicle: 2,30 m
Carrier vehicle: 3.400 kg
* The power requirement also depends upon the grass density and grass height
** Weight depending on the equipment
*** Mulcher in horizontal position
155 | 180 | 200 | 220 | 240 | |
A = m | 2,86 | 3,10 | 3,30 | 3,50 | 3,70 |
B = m | 1,87 | 1,87 | 1,87 | 1,87 | 1,87 |
C = m | 1,56 | 1,80 | 2,00 | 2,20 | 2,40 |
D = m | 0,25 | 0,25 | 0,25 | 0,25 | 0,25 |
E = m | 2,01 | 2,01 | 2,01 | 2,01 | 2,01 |
Colour selection…
RAL 3000

RAL 2011


Integrated holder for convenient storage of the universal joint shaft.

The stable collision guard ensures the greatest possible protection against collisions obstructions.

Removable guard pot for easy mounting of the universal joint shaft.

Cat. II for dismounting ensures greater free space of the universal joint shaft.

Skid right side to avoid that the machine presses into the ground!