PH
Undergrowth mulcher with hydraulic drive, for front attachment on wheel loaders, crawler track vehicles, large boom mowers or excavators
With its PH undergrowth mulcher humus brings to market a new powerhouse for green area maintenance and forestry work. The undergrowth mulcher with hydraulic drive has been especially developed for attachment on implement carriers with radio remote control. But it also suitable for other hydraulic carrier vehicles, e.g. for front attachment on wheel loaders, crawler track vehicles, large boom mowers or excavators.
The housing has a system angle bracket for fast and flexible attachment on a wide variety of carrier vehicles. Optionally the humus PH can be attached with a three-point linkage Cat. II on PTO shaft-driven carrier vehicles in front attachment and rear thrust, with 540 or 1000 rpm. Flexible tool use (cutter systems) enables different applications and implementation conditions. The rotor’s tool configuration can be easily swapped out and matched to the application. The hydraulic front flap with counter-cutters is standard equipment. The counter-cutters in the machine ensure better reduction of the mulched material.
The housing of Hardox steel promises a long service life and is designed for professional use. An ingenious tool system guarantees an optimal cutting pattern: Ideally suited for green area care and forestry work, for rough terrain; it mulches undergrowth and branches without any problems.
Fig. with special equipment
Well proven range of use
- Mulching of undergrowth and scrub
- Ditches and embankments
- Area management and landscape management
- Municipal deployment
- Maintenance of bushy areas
- Recultivation
- Infrastructure measures
- Line maintenance
- Biotope maintenance
- Embankment maintenance
- Renaturation
Basic equipment
- Housing with system angle for quick and variable installation on the carrier vehicle
- Overload protection by flexible V-belt drive
- Large tray of mulch
- Rotor tube diameter 450 mm
- Axial piston motor
- Hydraulic maintenance cover in front
- Housing of Hardox® wear plate
- Interchangeable skids of Hardox® wear plate
- Rotor with cutting depth limitation
- 2 interchangeable counter-cutters in the housing
- Cutting height adjustment up to 5 cm over skid
Accessories / special equipment
- Three-point receptacle Cat. II with hydraulic lateral adjustment
- Three-point receptacle Cat. II with mechanical lateral adjustment
- Delivery with gearbox drive (gearbox depends on the direction of rotation)
- Feeder valve 34 cm3
- Feeder valve 64 cm3
- Three-point receptacle Cat. II with hydraulic lateral adjustment and gearbox that is dependant on the direction of rotation.
- For front attachment or rear-push
- Hydraulic pressing device, 36 kg
- Pressing device, 32 kg
- Universal mounting
- Robocut mounting without swivel
- Skid-Steer mounting
- Energreen mounting
Technical data
Blade systems B70 / B80 26 pcs.
Working width: 1.25 m
Overall width: 1.45 m
Power requirement* min. kW/hp: 40 / 54
Axial piston motor: 55 up to 110 l
Rpm of PTO: 540 or 1000 rpm
Weight**: approx. 460 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Blade systems B70 / B80 28 pcs.
Working width: 1.35 m
Overall width: 1.55 m
Power requirement* min. kW/hp: 50 / 68
Axial piston motor: 55 up to 110 l
Rpm of PTO: 540 or 1000 rpm
Weight**: approx. 510 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Blade systems B70 / B80 30 pcs.
Working width: 1.45 m
Overall width: 1.65 m
Power requirement* min. kW/hp: 55 / 75
Axial piston motor: 55 up to 110 l
Rpm of PTO: 540 or 1000 rpm
Weight**: approx. 540 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
Blade systems B70 / B80 30 pcs.
Working width: 1.60 m
Overall width: 1.80 m
Power requirement* min. kW/hp: 63 / 85
Axial piston motor: 55 up to 110 l
Rpm of PTO: 540 or 1000 rpm
Weight**: approx. 610 kg
* The power requirement also depends upon the grass density and grass height
** Weight may differ according to equipment
The optimally balanced rotor with the B70 and B80 cutter systems ensures less wear on the bearings. The high rotor speed ensures high productivity and an optimal work result.
The rotor has a cutting depth limitation that prevents excessive depth in the material to be mulched, thus excessive reduction of the rotor speed is prevented. This a particular advantage with low-power carrier vehicles, in maintaining the rotor speed.
B70: The B70 cutter is the ideal partner for tasks with light ground contact! Thanks to its single-edged, sharp and hardened blade, you obtain the best finechopping results. The B70 cutter is suitable for all ground conditions, all types of vegetation and all types of undergrowth strata.
B80: Triple-edged carbide tool with offset cutting edges for wear-intensive and sandy applications. Minimal force requirement thanks to diagonally inserted carbide plates and an additional wear guard on the holder.
Three-point receptacle Cat. II with hydraulic lateral adjustment and gearbox that is dependant on the direction of rotation. For front attachment or rear-push.
Hydraulic pressing device, 36 kg
Pressing device, 32 kg
Universal mounting
Robocut mounting without swivel
Skid-Steer mounting
Energreen mounting
