Fig. with special equipment – sawn timber clearer with lift-out
KMN
Flat drive – Strong performance for mulching and wood shredding
The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.
As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.
Description
Well proven range of use
- In orchards and vineyards
- In pasture and land maintenance
- Landscape maintenance
- Mulching of roadside vegetation
- Alongside paths and roads
- In sports facilities and parkways
- For lawn maintenance at airports and on fallows
- In strawberry orchards and forestry
- For shredding prunings
- Mulching of corn stover
Basic equipment
- Mounting: front
- High-quality angular gear with two running wheels: robust, flexible drive over enhanced V-belt on the rotor shaft, automatic belt tensioning
- Gearbox independent of direction of rotation only for 540 rpm or 1,000 rpm
- Self-cleaning roller with large spherical roller bearings, drive roll diameter 170 mm
- At the ends of conical shaped rear roller for a smooth cornering
- Cutting height adjustment on rear roller and top link, roller height-adjustable
- Serrated counter-cutter in the housing to increase the degree of defibration and reduction of the mulch mass
- Manual 3-point parallelogram-side adjustment – adjustment 41 cm
- Rotor tube diameter 140 mm
- Low V-belt drive sidewise
Accessories / special equipment
- PTO (part no. 800.11.004)
- Set of skids (part no. 521.95.923)
- Wear plates
- Hydraulic side adjustment for mulcher / 42 cm adjustment track (part no. 224.90.402)
- Attachment plate for rubber shred rotor, adjustable incline (229.95.901)
- Support frame OB II single-sided (right) with hydraulic lift-out
- Rubber shred rotor / inter-row cutter 1 per side
- Support frame OB II with hydraulic lift system (two-sided)
- Rubber shred rotor with holder for front mounting
Product video
You are currently viewing a placeholder content from Default. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information
* The power requirement also depends upon the grass density and grass height *** Weight may differ according to equipment
Technical data
KMN 155 | KMN 180 | KMN 200 | KMN 220 | |||||
|---|---|---|---|---|---|---|---|---|
| „Y“-type blades: | pcs. | 48 | 54 | 60 | 66 | |||
| System flails: | pcs. | 12 | 14 | 16 | 16 | |||
| Working width: | m | 1,55 | 1,80 | 2,00 | 2,20 | |||
| Overall width: | m | 1,70 | 1,95 | 2,15 | 2,35 | |||
| Housing height drive side : | mm | 571 | 571 | 571 | 571 | |||
| Housing height offset side : | mm | 487 | 487 | 487 | 487 | |||
| Max. lateral offset from tractor centre | m | 1,18 | 1,32 | 1,42 | 1,52 | |||
| Power requirement*: | from kW / hp | 37 / 50 | 37 / 50 | 37 / 50 | 37 / 50 | |||
| Rpm of PTO: | rpm | 540 or 1,000 – depending on the equipment | ||||||
| Weight**: | approx. kg | 620 | 630 | 640 | 690 | |||
Cutting system
“Y“-type blades
Claw blade
Fine edge blade
Club flails
Click on the picture of the blade for more details
Accessories / special equipment
The row cleaner
The row cleaner can be mounted at the KM flail mulcher to clean away scrub. Front and rear mounting possible.