for tractors from 50 hp

Heavy model for mulching and wood shredding

The PME flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. A use at the front or rear is possible without any effort. The serial 3-point linear sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings. As the PME is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

Our offer

Get a non-binding offer.


  • In orchards and vineyards
  • In pasture and land maintenance
  • Landscape maintenance
  • Mulching of roadside vegetation
  • Alongside paths and roads
  • In sports facilities and parkways
  • For lawn maintenance at airports and on fallows
  • In strawberry orchards and forestry
  • For shredding prunings
  • Mulching of corn stover
  • Mounting: front and rear
  • High-quality angular gear with two running wheels: robust, flexible drive over enhanced V-belt on the rotor shaft, automatic belt tensioning
  • Gearbox independent of direction of rotation only for 540 rpm or 1,000 rpm
  • Self-cleaning roller with large spherical roller bearings, drive roll diameter 170 mm
  • At the ends of conical shaped rear roller for a smooth cornering
  • Cutting height adjustment on rear roller and top link, roller height-adjustable
  • Serrated counter-cutter in the housing to increase the degree of defibration and reduction of the mulch mass
  • Hydraulic side adjustment – adjustment 400 mm
  • Rotor tube diameter 140 mm
  • Low V-belt drive sidewise
  • Set of skids
  • PTO
  • Support frame OB II one-sided (to the right) with hydraulic lifting
  • Support frame OB II with hydraulic lifting (two-sided)
  • Rubber shred rotor / row cleaner
  • Wear plate
humus PME zum Mulchen von Straßenbegleitgrün
humus PME zum Mulchen von zwischen den Weinreben
humus PME zum Mulchen von Obstanlagen

Technical data

PME 155

PME 180

PME 200

PME 220

„Y“-type blades:pcs.48546066
System flails:pcs.12141616
Working width :m1,551,802,002,20
Overall width:m1,741,982,182,38
Housing height drive side :mm594594594594
Housing height offset side :mm517517517517
Max. lateral offset from tractor centre:m1,061,301,401,50
Power requirement*:from kW / hp37 / 5037 / 5037 / 5037 / 50
Rpm of PTO:rpm540 / 1.000 – depending on equipment
Weight**:approx. kg660720780830

* The power requirement also depends upon the grass density and grass height    *** Weight may differ according to equipment

Blade system for PME flail mulcher

“Y“-type blades

Claw blade

Fine edge blade

Club flails

Click on the picture of the blade for more details