for tractors from 130 hp

Mounting: front and / or rear
For tractors from 96 kW / 130 hp

Our offer

Get a non-binding offer.

The humus PMG with a working width of 280 cm and a device width of 300 cm is equipped with 24 humus system flails (flail weight approx. 4 kg).

With a machine weight of 1660 kg, the device is suitable for tractors from 180 hp. The big brother of the humus PMF shines with a newly developed drive, which has now been replaced by a toothed belt instead of four belts, which means that a smaller protective box is required on the machine than before.

A rasp bar has been added as a new function, which works like a shearbar. The large housing enables a high passage height and thus supports the high working speeds, as the mulched material can flow off very quickly.

The high working speed is particularly interesting for contractors and large areas, since time management is also becoming increasingly important in agriculture. The newly designed three-point bracket with linear lateral adjustment, which enables a large lateral displacement of up to 63 cm, is standard. The new three-point bracket mount can be used for front and/or rear mounting. The machine is equipped with skids as standard.


  • in the pasture and land maintenance
  • for mulching lawns
  • for mulching infertillage
  • for mulching corn stover
  • for lawn maintenance
  • to slice and dice of sawn timber
  • in the landscape maintenance
  • mulching of crop residues
  • Attachement: Cat. II and III
  • Skids
  • Support foot
  • Flail weight: 4,2 kg
  • Field of cutter rotation: 610 mm
  • Passage height – housing: 702 mm
  • Entry height – housing: 360 mm
  • 2 serrated counter-cutters in the housing to increase the degree of defibration and reduction of the mulch mass
  • Diameter of the track roller: Ø 250 mm
  • Cutting height adjustment element with track roller
    (100 mm) and top link
  • Gearbox stub height above ground approx. 880 mm
  • Self-cleaning roller with large storage and floor-friendly guide to the rounded ends and vertical adjustment of the mulcher
  • Spherical roller bearing rotor shaft
  • Front and rear rubber protection cloths
  • Metal flaps
  • High quality angular gearbox with free wheel
  • Robust drive via toothed belt on the rotor shaft
  • Hardox® wear plate
  • Lighting equipment with warning plates
  • Relieving device for front mounting
  • PTO (part no. 800.12.053)
  • Transport frame

Technical data

PMG 280

Fine edge blade:pcs.24
Working width:m2,78
Overall width:m3,00
Total weight**kg1.660
Power requirement*:from kW / hp96 kW or 130 hp
Rpm of PTO:rpm1.000
Knife shaft speed:min-11.428

* The power requirement also depends upon the grass density and grass height    *** Weight may differ according to equipment

Blade system fitting to PMG-flail-mulcher

humus Fine edge blade with 4.2 kg

For 30 mm bolt

Click on the picture of the blade for more details



Transport frame

Balancing device for front mounting