SMfor tractors from 50 hp
With PTO drive – Especially suitable for front mounting on all municipal and small tractors
optional
Fig. with special equipment
The humus SM is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all municipal vehicles and special tractors. Beyond that the SMK/H / SMH can still be used after a vehicle change with its flexible mounting system.
Description
Colour selection
| RAL 3000 | RAL 2011 |
|---|---|
 |
 |
Well proven range of use
- In horticulture
- In berry orchards
- In nurseries
- In sports facilities and parkways
- For lawn maintenance at airports and on fallows
- In pasture and land maintenance
- Landscape maintenance
- Mulching of roadside vegetation
- Mulching of corn stover
Basic equipment
- Mounting: front or rear
- Housing with system angle for quick installation on the carrier vehicle
- Set of skids
- Rear roller adjustment for good soil management and precise cutting height
- Transmission with drive-through and pivoting
- Large tray of mulch behind the roller
- Overload protection by flexible V-belt drive
Accessories / special equipment
- Hydraulic maintenance cover without hoses for maintenance cover at the front (supplied loose) (part no. 268.95.079)
- PTO without free wheel up to 1,000 rpm
(part no. 800.10.001) - PTO balanced without overrunning
clutch for PTO speed over 1,000 rpm - Spring kit for strain relief
- Set of wheels, wheel diameter 300 x 100 mm (not possible in connection with hydraulic cylinder for maintenance cover)
- Set of foam-filled wheels, wheel diameter 300 x 100 mm (not possible in connection with hydraulic cylinder for maintenance cover)
- Wear plates SM 085 – SM 125
- Wear plates SM 145 – SM 175
Product video
You are currently viewing a placeholder content from Default. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information
Technical data
SM 085 |
SM 105 |
SM 125 |
SM 145 |
SM 155 |
SM 175 |
||
|---|---|---|---|---|---|---|---|
| Small flails/Fine edge blade | pcs. | 14 | 18 | 24 | 28 | 30 | impossible |
| Safety Mulcher | pcs. | 12 | 15 | 18 | 21 | 24 | 27 |
| Working width | m | 0,85 | 1,05 | 1,25 | 1,45 | 1,55 | 1,75 |
| Overall width | m | 0,95 | 1,15 | 1,35 | 1,55 | 1,65 | 1,85 |
| Housing height | m | 0,33 | 0,33 | 0,33 | 0,33 | 0,33 | 0,33 |
| Power requirement* | from kW/hp | 12 / 16 | 12 / 16 | 17 / 23 | 22 / 30 | 26 / 36 | 28 / 38 |
| Rpm of PTO | rpm | 540, 1,000 or 2,000 – or other speeds on request | |||||
| Weight** | approx. | 144 | 160 | 180 | 220 | 240 | 285 |
* The power requirement also depends upon the grass density and grass height *** Weight may differ according to equipment
Attachment variants SM
Adjustable coupling triangle, Cat. 0 (part no. 266.95.090)
Attachment: Kubota F-Series (part no. 266.95.415)
Attachment: John Deere F-Series, Shibaura, Husqvarna PT, Iseki SF-Series New Holland (part no. 266.95.198)
Attachment: Three-point Cat. I or II and for Holder (part no. 266.95.054)
Special equipment
Hydraulic side shift / 28 cm adjustment track – only front mounting, 3-point and up to 1,000 rpm – available from SM 105 (part no. 266.95.280)
Figure: hydraulic
Hydraulic lateral adjustment in conjunction
with parallelogram adjustment (Only for front or rear attachment in Cat. I and II) / adjustment
distance approx. 40 cm
(from SM 145 possible)
(part no. 590.95.120)
Mechanical lateral
adjustment in
conjunction with
parallelogram
(part no. 590.95.121)
Small flails
Fine edge blade B60
Click on the picture of the blade for more details