Height adjustment H 240
WMHfor tractors from 20 hp
With hydraulic drive, especially suitable for mounting on all compact tractors, special tractors, wheel loaders, mini excavators, municipal vehicles and extension mowers
humus WMH: hydraulic mulching head for mixed fleets and rapid changeovers
If you switch carriers frequently, you need a tool that keeps up. The humus WMH is a versatile mulching head with a universal mounting housing.
It is engineered for quick, straightforward attachment, even when different carrier vehicles are in use. Result: less setup time and more productive hours.
Benefits at a glance
- One head, many carriers: compatible with 3-point hitch, skid-steer mount, Euro mount, Vermeer mount, and a bracket for fork carriers without hook mounts
- Fast changeovers: the universal mounting housing supports quick, easy swaps between vehicles
- Consistent mulching quality: serrated counter blades inside the housing increase the degree of shredding
- Low maintenance in daily use: robust, compliant V-belt drive to the rotor shaft for reliable power transmission and reduced need for readjustment
Description
Well proven range of use
- in orchards and vineyards
- in horticulture
- in berry plantations
- in nurseries
- in sports facilities and parkways
- fallows
- in landscape maintenance
- to shred prunings
- in municipal use
Basic equipment
- Mounting: front, rear and extension
- Housing with system angle for quick installation on the carrier vehicle
- Robust, flexible drive via enhanced V-belt on the rotor shaft
- Rear roller adjustment for good soil management and precise cutting height
- Self-cleaning roller with large storage and floor-friendly guide to the rounded ends and vertical adjustment the mulch machine – at WMH 135 and 145
- Drive roller diameter: 140 mm
- Rotor tube diameter: 102 mm
- Serrated counter-cutter in the housing to increase the degree of defibration and reduction of the mulch mass
- Housing height: flat drive 602 mm, high drive 743 mm
- Housing height on the discharge side 487 mm
- Matching gear motor (oil motor) for the delivery rate (oil) of the carrier vehicle
Accessories / special equipment
- Height adjustment H 240 / 240 mm adjustment, 43 kg
(part no. 267.95.162) - Height adjustment H 240 P / 240 mm adjustment with pendulum balance, 63 kg (part no. 267.95.163)
- Rotor brake valve including feeder valve up to 80 liter (part no. 267.95.360)
- Rotor brake valve with pressure relief valve, speed limiter, including feeder valve (part no. 267.95.139)
Height adjustment H 240 P
Technical data
WMH 85 |
WMH 95 |
WMH 105 |
WMH 115 |
WMH 125 |
WMH 135 |
WMH 145 |
||
|---|---|---|---|---|---|---|---|---|
| „Y“-type blades: | pcs. | 24 | 28 | 30 | 36 | 36 | 42 | 44 |
| System flails: | pcs. | 8 | 8 | 8 | 8 | 10 | 10 | 12 |
| Working width : | m | 0,85 | 0,95 | 1,05 | 1,15 | 1,25 | 1,35 | 1,45 |
| Overall width : | m | 0,95 | 1,05 | 1,15 | 1,25 | 1,35 | 1,45 | 1,55 |
| Power requirement*: | from kW / hp | 15 / 20 | 15 / 20 | 15 / 20 | 16 / 22 | 18 / 25 | 18 / 25 | 22 / 30 |
| Oil motors: | l | 25 – 130 | ||||||
| Weight***: | approx. kg | 235 | 255 | 275 | 295 | 315 | 335 | 355 |
* The power requirement also depends upon the grass density and grass height *** Weight may differ according to equipment
Blade systems compatible with the WMH
„Y“-type blades
Claw blade
Fine edge blade
Club flails
Click the corresponding blade image to go straight to the blade system’s technical details.
Accessories / Special equipment
Hydraulic side shift
in connection with
parallelogram shift (only for front or rear mounting) /
adjustment way
approx. 400 mm (possible from WMH 125)
(part no. 590.95.120)
Mechanical lateral
adjustment (only for front or rear mounting)
(part no. 590.95.121)
Set of skids standard equipment
3-point linkage Cat. I and II
Skid-Steer mounting (only WMH 125 – 145)
Euro mounting (only WMH 125 – 145) (part no. 590.95.155)
Skid-Steer mounting
(only WMH 125 – 145)
Mounting for fork carriage without mounting hooks (part no. 267.95.466)