Showing all 14 results

KM

for tractors from 27 hp

The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.

As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

KMB

For Tractors from 44 kW / 60 HP

Maximum Efficiency in Land Maintenance
The KMB flail mower is a versatile mulcher for grass, pasture, fallow land, and stubble. Two serrated counter blades have been integrated into the housing to increase the degree of shredding of the mulch material. The cutting height can be adjusted directly on the roller between 30 and 80 mm. The high-quality angle gearbox with freewheel ensures a robust and flexible drive via the reinforced V-belts to the rotor shaft. The V-belt tension is automatic. The particularly low-profile design and the low-mounted drive are outstanding features for use in land maintenance.

KMF

for tractors from 40 hp

The humus KMF is the heaviest and most solid model of humus mulchers. Thanks to high-quality components such as branded roller bearings, angular gears and a case made of fine-grained steel, the humus KMF flail mulchers are designed for a long durability and professional use.

Due to the two-sided three-point frame, the use at the front or rear is possible without any effort. The customer has the possibility to customise the humus KMF flail mulcher optimally for himself and his use with the wide variety of accessories and special equipment.

KMN

for tractors from 50 hp

The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.

As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

PM

for tractors from 250 hp

The humus PM series of flail mulchers has been developed to meet the highest requirements and for hp capacities of up to 320 hp. The objective was to develop a mulcher that combines high work performance, stability and a high working speed.

The new humus PM mulcher permits working speeds of up to 14 km/h. The large housing with a passage height of 80 cm likewise supports the high
working speeds, because the mulched material can very quickly flow off.

The high working speed is particularly interesting for machinery contractors and for working large areas, as time management in agriculture is becoming increasingly significant as well. Thanks to high-quality components, such as branded roller bearings, angular gears and a case made of finegrained steel, the PM flail mulchers are designed for a long durability and professional use.

The PM flail mowers offer an ideal adaptation to the terrain. The large rear roller with a 32 mm Ø tracks the ground over the entire working width and ensures quiet operation, even on uneven terrain.

PME

for tractors from 50 hp

The PME flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. A use at the front or rear is possible without any effort. The serial 3-point linear sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings. As the PME is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

PMF

for tractors from 60 hp

The PMF has a newly-designed three-point bracket with linear lateral adjustment, which enables a high lateral thrust of up to 63 cm. The new three-point bracket receptacle can be used for front and/or rear attachment. An extensive offering of optional special accessories, such as drop flaps made of Hardox steel, is provided for the machine. The machine is factory-equipped with skids. The skids stabilise the machine in motion and prevent the rotor shafts from penetrating too deeply into the soil. The working width of the powerful PMF humus mulcher is between 2.40 meters and 3.20 meters, and depending on the model the PMF humus mulchers are suitable for tractors from 50 hp up to 200 hp.

PMG

for tractors from 130 hp

The humus PMG with a working width of 280 cm and a device width of 300 cm is equipped with 24 humus system flails (flail weight approx. 4 kg).

With a machine weight of 1660 kg, the device is suitable for tractors from 180 hp. The big brother of the humus PMF shines with a newly developed drive, which has now been replaced by a toothed belt instead of four belts, which means that a smaller protective box is required on the machine than before.

A rasp bar has been added as a new function, which works like a shearbar. The large housing enables a high passage height and thus supports the high working speeds, as the mulched material can flow off very quickly.

The high working speed is particularly interesting for contractors and large areas, since time management is also becoming increasingly important in agriculture. The newly designed three-point bracket with linear lateral adjustment, which enables a large lateral displacement of up to 63 cm, is standard. The new three-point bracket mount can be used for front and/or rear mounting. The machine is equipped with skids as standard.

PML

for tractors from 150 hp

The new PML humus flail mulcher can be operated in front or rear attachment. Thanks to the new Hardox steel housing, it was possible to achieve a significant weight reduction. Thus the lightweight PML humus flail mulcher is by no means inferior to its big brother, the KMF, in rigidity and stability and offers convincing performance thanks to its lightweight design. For example, with its lowest possible machine weight of 760 kg, working widths of up to 2.78 meters can be achieved. The machine is factory-equipped with skids. The skids stabilise the machine in motion and prevent the rotor shafts from penetrating too deeply into the soil. Thanks to the minimal machine weight, the PML is also suitable for slope tractors. The PML is designed for tractors up to 150 hp.

SM

for tractors from 50 hp

The humus SM is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all municipal vehicles and special tractors. Beyond that the SMK/H / SMH can still be used after a vehicle change with its flexible mounting system.

SME

for tractors from 16 hp

The humus SME is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all two-wheel tractors. Beyond that an adjustable mounting system allows a perfect adaption to the carrier vehicle. In this category the SME series is unique. The solid and torsion-free housing and the solid bearings on the rear roller and rotor shaft make these mulchers absolutely reliable partners, even with the professional user!

SPG

for tractors from 30 hp

The SPG flail mulcher is a lightweight and inexpensive mulcher of high quality and for all kinds of mulching works. The SPG is suitable for engine- power classes up to 75 hp.

Like its models in the humus professional category, the SPG flail mulcher is characterised by a large-dimensioned rotor shaft with a solid spherical roller bearing and a self- cleaning roller 170 mm Ø.

Type A


for tractors from 40 hp

The front flail mulcher Type A is designed that it can be mounted to almost all special tractors.

Apart from the capability with landscape care in municipal use, due to its stability the Type A model offers excellent requirements for mulching in lopes, in agriculture and forestry as well as in fruit-growing and viticulture.

WM

for tractors from 18 hp

The sturdy WM flail mulchers are fitted with a solid and torsion-free steel sheet housing and a compact design. The slim drive box is ideal for mulching in vinicultureand other cultures in rows.

Thanks to the special mounting system, it is possible to equip the machines with various accessories and fulfill every customisation individually, whether rear mounting, front mounting or rear and front mounting.

The customer can choose between rigid mounting or hydraulic sideshift adjustment. It is also possible to mount special equipment such as mulching heads or rotary tillers. Due to the hinged mounting and shredding device it can be switched easily between mulching and shredding prunings. Just pull the prongs and open the cover. Thus, the WM flail mulcher is very versatile. From wineries up to gardening and landscaping designers or municipal businesses.