Showing all 10 results
The HKN offers universal implementation, it is easy to move and has a clean cutting pattern. Cutting height can be varied in stages via the skids and the track roller. The HKN works trouble-free, even at
relatively high drive speeds.
Special timber cutters are available for shredding wood.
The HKP rotary mower is a cost-efficient variant for orchards. It is used when the tree strip is sprayed with chemicals or is kept open with a cultivator. In addition, it has optimally proven itself in general green area maintenance.
The linear lateral adjustment enables lateral reach of the HKP on the tractor.
The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.
As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.
The humus KMF is the heaviest and most solid model of humus mulchers. Thanks to high-quality components such as branded roller bearings, angular gears and a case made of fine-grained steel, the humus KMF flail mulchers are designed for a long durability and professional use.
Due to the two-sided three-point frame, the use at the front or rear is possible without any effort. The customer has the possibility to customise the humus KMF flail mulcher optimally for himself and his use with the wide variety of accessories and special equipment.
The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.
As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.
With its PH undergrowth mulcher humus brings to market a new powerhouse for green area maintenance and forestry work. The undergrowth mulcher with hydraulic drive has been especially developed for attachment on implement carriers with radio remote control. But it also suitable for other hydraulic carrier vehicles, e.g. for front attachment on wheel loaders, crawler track vehicles, large boom mowers or excavators.
The „Lift-up“ pull-in roller feeds the mulch to the rotor. This increases the service life of the blade system, as the mulch is conveyed upwards from the ground, greatly reducing contact between the blade system and stones is greatly reduced. Due to the upward direction of rotation of the rotor, the mulch (sawn timber) is conveyed with high efficiency through the housing past the two counter blades in the housing and shredded.
The combination of forestry rotor with pull-in roller „Lift-up“ ensures a higher travelling speed and a significantly improved shredding result of the biomass.
The PME flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. A use at the front or rear is possible without any effort. The serial 3-point linear sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings. As the PME is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.
The humus PS undergrowth mulcher impresses with its light weight and high performance in forestry and municipal applications (keeping roads clear, clearance, forest residues, etc.). The humus PS undergrowth mulcher is also perfectly suited for use in traditional agriculture (conversion of overhanging orchards or similar).
Thanks to the special mounting system, it is possible to equip the machines with various accessories and fulfill every customisation individually, whether rear mounting, front mounting or rear and front mounting.
The customer can choose between rigid mounting or hydraulic sideshift adjustment. It is also possible to mount special equipment such as mulching heads or rotary tillers. Due to the hinged mounting and shredding device it can be switched easily between mulching and shredding prunings. Just pull the prongs and open the cover. Thus, the WM flail mulcher is very versatile. From wineries up to gardening and landscaping designers or municipal businesses.
