Showing all 21 results
Hydraulic compact boom arm for small tractors and narrow gauge tractors or compact tractors.
The BMS boom is factory equipped with a friction-reduced multi lever Bowden cable control system.
Additional boom mowers on request!
Front side mulcher with a new designed side adjustment – for narrow-gauge tractors, municipal tractors, small tractors and wheel loaders with a hydraulic performance from 27 hp.
Thanks to the hydraulic drive it runs very quietly because of missing gearbox noise. With its very compact mounting to the carrier vehicle, the GLS offers twice as many capabilities: as front mulcher directly in front of the carrier vehicle or as a side mulcher. With its large transverse displacement of 104 cm it is possible to shift it completely to the right – next to the tractor – to mulch alongside paths and roads, as well as slopes and ditches.
The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.
As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.
Heavy mulcher with hydraulic drive, for front attachment and attachment on large boom mowers, wheel loaders, excavators, etc.
The mulching head is characterised by its extremely stable housing and strong bearings.
The humus KMF is the heaviest and most solid model of humus mulchers. Thanks to high-quality components such as branded roller bearings, angular gears and a case made of fine-grained steel, the humus KMF flail mulchers are designed for a long durability and professional use.
Due to the two-sided three-point frame, the use at the front or rear is possible without any effort. The customer has the possibility to customise the humus KMF flail mulcher optimally for himself and his use with the wide variety of accessories and special equipment.
With its PH undergrowth mulcher humus brings to market a new powerhouse for green area maintenance and forestry work. The undergrowth mulcher with hydraulic drive has been especially developed for attachment on implement carriers with radio remote control. But it also suitable for other hydraulic carrier vehicles, e.g. for front attachment on wheel loaders, crawler track vehicles, large boom mowers or excavators.
The „Lift-up“ pull-in roller feeds the mulch to the rotor. This increases the service life of the blade system, as the mulch is conveyed upwards from the ground, greatly reducing contact between the blade system and stones is greatly reduced. Due to the upward direction of rotation of the rotor, the mulch (sawn timber) is conveyed with high efficiency through the housing past the two counter blades in the housing and shredded.
The combination of forestry rotor with pull-in roller „Lift-up“ ensures a higher travelling speed and a significantly improved shredding result of the biomass.
The PMF has a newly-designed three-point bracket with linear lateral adjustment, which enables a high lateral thrust of up to 63 cm. The new three-point bracket receptacle can be used for front and/or rear attachment. An extensive offering of optional special accessories, such as drop flaps made of Hardox steel, is provided for the machine. The machine is factory-equipped with skids. The skids stabilise the machine in motion and prevent the rotor shafts from penetrating too deeply into the soil. The working width of the powerful PMF humus mulcher is between 2.40 meters and 3.20 meters, and depending on the model the PMF humus mulchers are suitable for tractors from 50 hp up to 200 hp.
The new PML humus flail mulcher can be operated in front or rear attachment. Thanks to the new Hardox steel housing, it was possible to achieve a significant weight reduction. Thus the lightweight PML humus flail mulcher is by no means inferior to its big brother, the KMF, in rigidity and stability and offers convincing performance thanks to its lightweight design. For example, with its lowest possible machine weight of 760 kg, working widths of up to 2.78 meters can be achieved. The machine is factory-equipped with skids. The skids stabilise the machine in motion and prevent the rotor shafts from penetrating too deeply into the soil. Thanks to the minimal machine weight, the PML is also suitable for slope tractors. The PML is designed for tractors up to 150 hp.
The humus PS undergrowth mulcher impresses with its light weight and high performance in forestry and municipal applications (keeping roads clear, clearance, forest residues, etc.). The humus PS undergrowth mulcher is also perfectly suited for use in traditional agriculture (conversion of overhanging orchards or similar).
The humus SM is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all municipal vehicles and special tractors. Beyond that the SMK/H / SMH can still be used after a vehicle change with its flexible mounting system.
The humus SME is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all two-wheel tractors. Beyond that an adjustable mounting system allows a perfect adaption to the carrier vehicle. In this category the SME series is unique. The solid and torsion-free housing and the solid bearings on the rear roller and rotor shaft make these mulchers absolutely reliable partners, even with the professional user!
The series SMH is designed for universal implementation. It has an extremely compact and low design and thus is particularly well-suited for attachment on special tractors, wheel loaders, mini-excavators, municipal vehicles and boom mowers. Moreover, a variable attachment system enables easy continued use of this mulcher if there is a vehicle change.
The SP/SSP side mulchers offer double implementation possibilities: They can be used as rear mulchers directly behind the tractor. With the long parallelogram it is swung to the side next to the tractor to mulch on waysides and roadsides, and for mulching embankments and ditches.
The variable inclination range of 90° upward and 60° downward, as well as the variably adjustable swing ranges enable the greatest possible area of implementation!
The SPG flail mulcher is a lightweight and inexpensive mulcher of high quality and for all kinds of mulching works. The SPG is suitable for engine- power classes up to 75 hp.
Like its models in the humus professional category, the SPG flail mulcher is characterised by a large-dimensioned rotor shaft with a solid spherical roller bearing and a self- cleaning roller 170 mm Ø.
The SPS side mulcher is a light and attractively-priced side mulcher with pro qualities for all mulching tasks. The SPS is designed for power classes to 100 hp.
The SSG series can be attached on the rear on all small tractors/ compact tractors and they are available in left and right versions. Both series offer particularly versatile implementation.
With this mulcher application areas can be worked that cannot be reached with a front mulcher. Thus ditches and embankments are conveniently mulched and mulching under bushes and hedges is a breeze.
On the tractor only a single-acting control device is required.
The SSP side mulchers offer double implementation possibilities: They can be used as rear mulchers directly behind the tractor. With the long parallelogram it is swung to the side next to the tractor to mulch on waysides and roadsides, and for mulching embankments and ditches.
The variable inclination range of 90° upward and 60° downward, as well as the variably adjustable swing ranges enable the greatest possible area of implementation!
The front flail mulcher Type A is designed that it can be mounted to almost all special tractors.
Apart from the capability with landscape care in municipal use, due to its stability the Type A model offers excellent requirements for mulching in lopes, in agriculture and forestry as well as in fruit-growing and viticulture.
Thanks to the special mounting system, it is possible to equip the machines with various accessories and fulfill every customisation individually, whether rear mounting, front mounting or rear and front mounting.
The customer can choose between rigid mounting or hydraulic sideshift adjustment. It is also possible to mount special equipment such as mulching heads or rotary tillers. Due to the hinged mounting and shredding device it can be switched easily between mulching and shredding prunings. Just pull the prongs and open the cover. Thus, the WM flail mulcher is very versatile. From wineries up to gardening and landscaping designers or municipal businesses.
The WMH hydraulic mulching head is designed for universal use. It has a compact and low design and, with its hydraulic drive, is particularly well-suited for attachment on all special tractors, wheel loaders, mini-excavators, municipal vehicles and extension mowers.
In addition, a variable attachment system enables easy continued use of the mulcher if there is a vehicle change. Serrated counter-cutters in the housing increase the degree of shredding of the mulch mass and thus achieve optimum working results.
