Showing all 21 results

aflr-kreiselmulchgeraet-baumstreifen
Read more

AFLR

for tractors from 20 hp

The AFLR rotary mulchers offer an absolutely reliable and economic possibility for mulching the tree strip and implementing organic cultivation. The AFLR rotary mulchers have also proven themselves in the maintenance of photovoltaic systems and for mulching under fences.

They are built particularly low and have a smooth surface, in order to slide under the fruit-laden boughs. The compact design ensures favourable weight distribution on the tractor. The elastic V-belt drive is robust and insensitive.

hkp-kreiselmulcher-landschaftspflege
Read more

HKP

for tractors from 25 hp

The HKP rotary mower is a cost-efficient variant for orchards. It is used when the tree strip is sprayed with chemicals or is kept open with a cultivator. In addition, it has optimally proven itself in general green area maintenance.

The linear lateral adjustment enables lateral reach of the HKP on the tractor.

km-zum-holz-zerkleinern
Read more

KM

for tractors from 27 hp

The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.

As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

kma-kramer-hydraulischer-mulchkopf
Read more

KMA

for tractors from 23 hp

Heavy mulcher with hydraulic drive, for front attachment and attachment on large boom mowers, wheel loaders, excavators, etc.

The mulching head is characterised by its extremely stable housing and strong bearings.

kmf-maisfeld-frontanbau-mulcher
Read more

KMF

for tractors from 40 hp

The humus KMF is the heaviest and most solid model of humus mulchers. Thanks to high-quality components such as branded roller bearings, angular gears and a case made of fine-grained steel, the humus KMF flail mulchers are designed for a long durability and professional use.

Due to the two-sided three-point frame, the use at the front or rear is possible without any effort. The customer has the possibility to customise the humus KMF flail mulcher optimally for himself and his use with the wide variety of accessories and special equipment.

km-flach-schlegelmulcher
Read more

KMN

for tractors from 50 hp

The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.

As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

lv-kreiselmulchgeraet
Read more

LV

for tractors from 40 hp

Series LV rotary mulchers have an extremely compact and low design. They are attached close to the tractor. In conjunction with the lower depth, this is advantageous for weight distribution and a small turning radius.

The constant optimisation of the models has made this mulcher a powerful and versatile partner in vineyards. The working width can be variably and hydraulically adjusted via two cylinders! The three cast steel gearboxes and the wear-resistant sheet steel housing guarantee the familiar humus quality. A clean cutting pattern is achieved due to the two rotary cutters that run in opposite directions with movable, replaceable cutter blades.

With additional attachments multiple functions can be executed in one work step: Inter-row spraying, as well as cultivation in the undervine area with the INTERPLANET tiller head, or mulching in the undervine area with the INTERPLANET mulching head.

omb-kreiselmulcher-mit-bluehstreifeneinrichtung
Read more

OMB

for tractors from 45 hp

Beneficial insects (e.g. bees, butterflies) and predators of aphids and spider mites (ladybugs, aphid lions) are encouraged through blossom strips with indigenous flowering meadow plants and wild herbs in orchards. Through its lift-out rotary cutter the humus OMB enables the user to leave a 40 cm blossom strip standing. Likewise, scarification of the blossom strip (mulching the flower heads to stimulate growth) is also possible. Before harvesting fruit and in the headland the rotary cutter can be lowered, so the complete width of the row can be mulched.

With the humus OMB any desired working position can be freely selected, thanks to its solid design and its variable working width adjustment of 2.19 m to 3.07 m. The working width is infinitely variable and hydraulically adjusted from the tractor. Both swing discs can be adjusted synchronously or separately. Thus the OMB rotary mulcher offers an absolutely reliable and economic possibility for mulching the tree strip and implementing organic cultivation. Thanks to its smooth surface, the OMB slides easily under low-hanging branches.

The OMB rotary mulchers move on large track wheels with a wide contact area. They can be adjusted in height.

The humus OMB has a minimal power requirement and can be operated starting at 45 hp.

humus-ph-an-vermeer
Read more

PH

for tractors from 54 hp

With its PH undergrowth mulcher humus brings to market a new powerhouse for green area maintenance and forestry work. The undergrowth mulcher with hydraulic drive has been especially developed for attachment on implement carriers with radio remote control. But it also suitable for other hydraulic carrier vehicles, e.g. for front attachment on wheel loaders, crawler track vehicles, large boom mowers or excavators.

phl-humus-gestrueppmulcher-06
Read more

PHL

for tractors from 80 hp

The „Lift-up“ pull-in roller feeds the mulch to the rotor. This increases the service life of the blade system, as the mulch is conveyed upwards from the ground, greatly reducing contact between the blade system and stones is greatly reduced. Due to the upward direction of rotation of the rotor, the mulch (sawn timber) is conveyed with high efficiency through the housing past the two counter blades in the housing and shredded.
The combination of forestry rotor with pull-in roller „Lift-up“ ensures a higher travelling speed and a significantly improved shredding result of the biomass.

humus_pme-mulcher
Read more

PME

for tractors from 50 hp

The PME flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. A use at the front or rear is possible without any effort. The serial 3-point linear sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings. As the PME is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

humus-pmf-weide-und-flaechenpflege
Read more

PMF

for tractors from 60 hp

The PMF has a newly-designed three-point bracket with linear lateral adjustment, which enables a high lateral thrust of up to 63 cm. The new three-point bracket receptacle can be used for front and/or rear attachment. An extensive offering of optional special accessories, such as drop flaps made of Hardox steel, is provided for the machine. The machine is factory-equipped with skids. The skids stabilise the machine in motion and prevent the rotor shafts from penetrating too deeply into the soil. The working width of the powerful PMF humus mulcher is between 2.40 meters and 3.20 meters, and depending on the model the PMF humus mulchers are suitable for tractors from 50 hp up to 200 hp.

shf-kreiselmulcher-messerkreisel
Read more

SHF

for tractors from 40 hp

The SHF rotary mulchers are preferred for orchard implementation. Extremely flat and with a smooth surface they slide through under low-hanging boughs without damaging branches and fruit.

Thanks to the special design, easy retraction or extension on the rows is possible. The system attachment enables an extremely close attachment for every type of tractor. This has an advantageous effect for weight distribution and it enables a smaller turning radius.

humus-sm
Read more

SM

for tractors from 50 hp

The humus SM is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all municipal vehicles and special tractors. Beyond that the SMK/H / SMH can still be used after a vehicle change with its flexible mounting system.

SMH-mit-hydraulischem-mulchkopf
Read more

SMH

for tractors from 16 hp

The series SMH is designed for universal implementation. It has an extremely compact and low design and thus is particularly well-suited for attachment on special tractors, wheel loaders, mini-excavators, municipal vehicles and boom mowers. Moreover, a variable attachment system enables easy continued use of this mulcher if there is a vehicle change.

sp-seitenmulchgeraet
Read more

SP

for tractors from 82 hp

The SP/SSP side mulchers offer double implementation possibilities: They can be used as rear mulchers directly behind the tractor. With the long parallelogram it is swung to the side next to the tractor to mulch on waysides and roadsides, and for mulching embankments and ditches.

The variable inclination range of 90° upward and 60° downward, as well as the variably adjustable swing ranges enable the greatest possible area of implementation!

spg-schlegelmulcher
Read more

SPG

for tractors from 30 hp

The SPG flail mulcher is a lightweight and inexpensive mulcher of high quality and for all kinds of mulching works. The SPG is suitable for engine- power classes up to 75 hp.

Like its models in the humus professional category, the SPG flail mulcher is characterised by a large-dimensioned rotor shaft with a solid spherical roller bearing and a self- cleaning roller 170 mm Ø.

sps-seitenmulcher-schlegelmulchgeraet-heckenpflege
Read more

SPS

for tractors from 40 hp

The SPS side mulcher is a light and attractively-priced side mulcher with pro qualities for all mulching tasks. The SPS is designed for power classes to 100 hp.

sto-kreiselmulchgeraet
Read more

STO

for tractors from 45 hp

The STO rotary mulchers are preferred in orchard implementation.

Extremely flat and with a smooth surface it slides through under low-hanging boughs without damaging branches and fruit. However, the outstanding characteristics of the STO also ensure optimal mulching results for green area maintenance and on managed grassland with fruit trees.

As desired, the mulched material is distributed in the tramline behind the implement, or uniformly distributed laterally in the tree strip. The desired distribution can be adjusted on the discharge flaps.

typ-a-grossflaechenpflege
Read more

Type A


for tractors from 40 hp

The front flail mulcher Type A is designed that it can be mounted to almost all special tractors.

Apart from the capability with landscape care in municipal use, due to its stability the Type A model offers excellent requirements for mulching in lopes, in agriculture and forestry as well as in fruit-growing and viticulture.

vo-kreiselmulcher-arbeitsstreifenverstellung
Read more

VO

for tractors from 45 hp

VO rotary mulchers have a stable frame construction, designed particularly
for use on powerful tractors and for
the mulch-spray combination.

Within the variable working width adjustment of all VO rotary mulchers any desired position can be freely selected. The working width is variably adjusted from the tractor, hydraulically. Both swing discs can be adjusted synchronously or separately.

Thus the VO rotary mulchers offer an absolutely reliable and economic possibility for mulching the tree strip and implementing organic cultivation. They are built particularly low and have a smooth surface, in order to slide under the fruit-laden boughs.