Showing all 36 results

AFLR 3200

for tractors from 75 hp

The AFLR rotary mulchers offer an absolutely reliable and economic possibility for mulching the tree strip and implementing organic cultivation. The AFLR rotary mulchers have also proven themselves in the maintenance of photovoltaic systems and for mulching under fences. They are built particularly low and have a smooth surface, in order to slide under the fruit-laden boughs. The extensive lateral reach from the middle of the tractor of up to 2.8 meters for the AFLR 3200, makes working in standard tree orchards with treetops that are far apart or mulching under solar panels a breeze.

With the electro-hydraulic precision control system this is even executed automatically. The compact design ensures favourable weight distribution on the tractor.

The elastic V-belt drive is robust and insensitive.

AFLR

for tractors from 20 hp

The AFLR rotary mulchers offer an absolutely reliable and economic possibility for mulching the tree strip and implementing organic cultivation. The AFLR rotary mulchers have also proven themselves in the maintenance of photovoltaic systems and for mulching under fences.

They are built particularly low and have a smooth surface, in order to slide under the fruit-laden boughs. The compact design ensures favourable weight distribution on the tractor. The elastic V-belt drive is robust and insensitive.

BMS

for tractors from 50 hp

Hydraulic compact boom arm for small tractors and narrow gauge tractors or compact tractors.

The BMS boom is factory equipped with a friction-reduced multi lever Bowden cable control system.

Additional boom mowers on request!

GLS

for tractors from 45 hp

Front side mulcher with a new designed side adjustment – for narrow-gauge tractors, municipal tractors, small tractors and wheel loaders with a hydraulic performance from 27 hp.

Thanks to the hydraulic drive it runs very quietly because of missing gearbox noise. With its very compact mounting to the carrier vehicle, the GLS offers twice as many capabilities: as front mulcher directly in front of the carrier vehicle or as a side mulcher. With its large transverse displacement of 104 cm it is possible to shift it completely to the right – next to the tractor – to mulch alongside paths and roads, as well as slopes and ditches.

HKN

for tractors from 16 hp

The HKN offers universal implementation, it is easy to move and has a clean cutting pattern. Cutting height can be varied in stages via the skids and the track roller. The HKN works trouble-free, even at
relatively high drive speeds.

Special timber cutters are available for shredding wood.

HKP

for tractors from 25 hp

The HKP rotary mower is a cost-efficient variant for orchards. It is used when the tree strip is sprayed with chemicals or is kept open with a cultivator. In addition, it has optimally proven itself in general green area maintenance.

The linear lateral adjustment enables lateral reach of the HKP on the tractor.

INTERPLANET

To make the powerful humus-PLANET for ecological vine row cultivation accessible to a broader group of users, with the INTERPLANET, an additional attachment variant has been developed.

Thus it is also possible to attach the proven technology as a supplemental unit on mulchers and other cultivation implements of virtually any brand.

KM

for tractors from 27 hp

The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.

As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

KMA

for tractors from 23 hp

Heavy mulcher with hydraulic drive, for front attachment and attachment on large boom mowers, wheel loaders, excavators, etc.

The mulching head is characterised by its extremely stable housing and strong bearings.

KMF

for tractors from 40 hp

The humus KMF is the heaviest and most solid model of humus mulchers. Thanks to high-quality components such as branded roller bearings, angular gears and a case made of fine-grained steel, the humus KMF flail mulchers are designed for a long durability and professional use.

Due to the two-sided three-point frame, the use at the front or rear is possible without any effort. The customer has the possibility to customise the humus KMF flail mulcher optimally for himself and his use with the wide variety of accessories and special equipment.

KMN

for tractors from 50 hp

The KM flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. The serial 3-point parallelogram sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings.

As the KM is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

LV

for tractors from 40 hp

Series LV rotary mulchers have an extremely compact and low design. They are attached close to the tractor. In conjunction with the lower depth, this is advantageous for weight distribution and a small turning radius.

The constant optimisation of the models has made this mulcher a powerful and versatile partner in vineyards. The working width can be variably and hydraulically adjusted via two cylinders! The three cast steel gearboxes and the wear-resistant sheet steel housing guarantee the familiar humus quality. A clean cutting pattern is achieved due to the two rotary cutters that run in opposite directions with movable, replaceable cutter blades.

With additional attachments multiple functions can be executed in one work step: Inter-row spraying, as well as cultivation in the undervine area with the INTERPLANET tiller head, or mulching in the undervine area with the INTERPLANET mulching head.

MOUSEKILLER

The MOUSE KILLER generates a strongly compressed exhaust gas that lames mice in their underground tunnels and kill them shortly. If raptors, foxes, dogs, cats etc. track the dead mice later or even eat them they will not suffer damage. (In contrast, in case of use of toxic baits a secondary intoxication could occur).

The well-balanced technique with pressure compensation control provides a constant gas production and ensures an optimal effect in all mice burrows.

The design of the humus MOUSE KILLER is compact, flexible and stable in order to reach and work all operational areas in meadows, gardens, fruit orchards and vineyards without any difficulty. The device is space-saving collapsible and can even be transported in a station wagon.

OMB

for tractors from 45 hp

Beneficial insects (e.g. bees, butterflies) and predators of aphids and spider mites (ladybugs, aphid lions) are encouraged through blossom strips with indigenous flowering meadow plants and wild herbs in orchards. Through its lift-out rotary cutter the humus OMB enables the user to leave a 40 cm blossom strip standing. Likewise, scarification of the blossom strip (mulching the flower heads to stimulate growth) is also possible. Before harvesting fruit and in the headland the rotary cutter can be lowered, so the complete width of the row can be mulched.

With the humus OMB any desired working position can be freely selected, thanks to its solid design and its variable working width adjustment of 2.19 m to 3.07 m. The working width is infinitely variable and hydraulically adjusted from the tractor. Both swing discs can be adjusted synchronously or separately. Thus the OMB rotary mulcher offers an absolutely reliable and economic possibility for mulching the tree strip and implementing organic cultivation. Thanks to its smooth surface, the OMB slides easily under low-hanging branches.

The OMB rotary mulchers move on large track wheels with a wide contact area. They can be adjusted in height.

The humus OMB has a minimal power requirement and can be operated starting at 45 hp.

PH

for tractors from 54 hp

With its PH undergrowth mulcher humus brings to market a new powerhouse for green area maintenance and forestry work. The undergrowth mulcher with hydraulic drive has been especially developed for attachment on implement carriers with radio remote control. But it also suitable for other hydraulic carrier vehicles, e.g. for front attachment on wheel loaders, crawler track vehicles, large boom mowers or excavators.

PHL

for tractors from 80 hp

The „Lift-up“ pull-in roller feeds the mulch to the rotor. This increases the service life of the blade system, as the mulch is conveyed upwards from the ground, greatly reducing contact between the blade system and stones is greatly reduced. Due to the upward direction of rotation of the rotor, the mulch (sawn timber) is conveyed with high efficiency through the housing past the two counter blades in the housing and shredded.
The combination of forestry rotor with pull-in roller „Lift-up“ ensures a higher travelling speed and a significantly improved shredding result of the biomass.

PM

for tractors from 250 hp

The humus PM series of flail mulchers has been developed to meet the highest requirements and for hp capacities of up to 320 hp. The objective was to develop a mulcher that combines high work performance, stability and a high working speed.

The new humus PM mulcher permits working speeds of up to 14 km/h. The large housing with a passage height of 80 cm likewise supports the high
working speeds, because the mulched material can very quickly flow off.

The high working speed is particularly interesting for machinery contractors and for working large areas, as time management in agriculture is becoming increasingly significant as well. Thanks to high-quality components, such as branded roller bearings, angular gears and a case made of finegrained steel, the PM flail mulchers are designed for a long durability and professional use.

The PM flail mowers offer an ideal adaptation to the terrain. The large rear roller with a 32 mm Ø tracks the ground over the entire working width and ensures quiet operation, even on uneven terrain.

PME

for tractors from 50 hp

The PME flail mulcher is designed for universal use. The extremely flat design and the lowered drive are ideal for the use in fruit growing. A use at the front or rear is possible without any effort. The serial 3-point linear sideshift adjustment with large setting range allows lateral extension at the tractor. A powerful model for mulching and shredding prunings. As the PME is mounted closely to the tractor, the weight distribution is advantageous and guarantees a good manoeuvrability. The mulched material is spread out evenly behind the rear roller.

PMF

for tractors from 60 hp

The PMF has a newly-designed three-point bracket with linear lateral adjustment, which enables a high lateral thrust of up to 63 cm. The new three-point bracket receptacle can be used for front and/or rear attachment. An extensive offering of optional special accessories, such as drop flaps made of Hardox steel, is provided for the machine. The machine is factory-equipped with skids. The skids stabilise the machine in motion and prevent the rotor shafts from penetrating too deeply into the soil. The working width of the powerful PMF humus mulcher is between 2.40 meters and 3.20 meters, and depending on the model the PMF humus mulchers are suitable for tractors from 50 hp up to 200 hp.

PMG

for tractors from 130 hp

The humus PMG with a working width of 280 cm and a device width of 300 cm is equipped with 24 humus system flails (flail weight approx. 4 kg).

With a machine weight of 1660 kg, the device is suitable for tractors from 180 hp. The big brother of the humus PMF shines with a newly developed drive, which has now been replaced by a toothed belt instead of four belts, which means that a smaller protective box is required on the machine than before.

A rasp bar has been added as a new function, which works like a shearbar. The large housing enables a high passage height and thus supports the high working speeds, as the mulched material can flow off very quickly.

The high working speed is particularly interesting for contractors and large areas, since time management is also becoming increasingly important in agriculture. The newly designed three-point bracket with linear lateral adjustment, which enables a large lateral displacement of up to 63 cm, is standard. The new three-point bracket mount can be used for front and/or rear mounting. The machine is equipped with skids as standard.

PML

for tractors from 150 hp

The new PML humus flail mulcher can be operated in front or rear attachment. Thanks to the new Hardox steel housing, it was possible to achieve a significant weight reduction. Thus the lightweight PML humus flail mulcher is by no means inferior to its big brother, the KMF, in rigidity and stability and offers convincing performance thanks to its lightweight design. For example, with its lowest possible machine weight of 760 kg, working widths of up to 2.78 meters can be achieved. The machine is factory-equipped with skids. The skids stabilise the machine in motion and prevent the rotor shafts from penetrating too deeply into the soil. Thanks to the minimal machine weight, the PML is also suitable for slope tractors. The PML is designed for tractors up to 150 hp.

PS

for tractors from 34 hp

The humus PS undergrowth mulcher impresses with its light weight and high performance in forestry and municipal applications (keeping roads clear, clearance, forest residues, etc.). The humus PS undergrowth mulcher is also perfectly suited for use in traditional agriculture (conversion of overhanging orchards or similar).

SHF

for tractors from 40 hp

The SHF rotary mulchers are preferred for orchard implementation. Extremely flat and with a smooth surface they slide through under low-hanging boughs without damaging branches and fruit.

Thanks to the special design, easy retraction or extension on the rows is possible. The system attachment enables an extremely close attachment for every type of tractor. This has an advantageous effect for weight distribution and it enables a smaller turning radius.

SM

for tractors from 50 hp

The humus SM is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all municipal vehicles and special tractors. Beyond that the SMK/H / SMH can still be used after a vehicle change with its flexible mounting system.

SME

for tractors from 16 hp

The humus SME is designed for the universal use. With its extremely compact and low construction and a hydraulic drive the SMK is particularly suitable for all two-wheel tractors. Beyond that an adjustable mounting system allows a perfect adaption to the carrier vehicle. In this category the SME series is unique. The solid and torsion-free housing and the solid bearings on the rear roller and rotor shaft make these mulchers absolutely reliable partners, even with the professional user!

SMH

for tractors from 16 hp

The series SMH is designed for universal implementation. It has an extremely compact and low design and thus is particularly well-suited for attachment on special tractors, wheel loaders, mini-excavators, municipal vehicles and boom mowers. Moreover, a variable attachment system enables easy continued use of this mulcher if there is a vehicle change.

SP

for tractors from 82 hp

The SP/SSP side mulchers offer double implementation possibilities: They can be used as rear mulchers directly behind the tractor. With the long parallelogram it is swung to the side next to the tractor to mulch on waysides and roadsides, and for mulching embankments and ditches.

The variable inclination range of 90° upward and 60° downward, as well as the variably adjustable swing ranges enable the greatest possible area of implementation!

SPG

for tractors from 30 hp

The SPG flail mulcher is a lightweight and inexpensive mulcher of high quality and for all kinds of mulching works. The SPG is suitable for engine- power classes up to 75 hp.

Like its models in the humus professional category, the SPG flail mulcher is characterised by a large-dimensioned rotor shaft with a solid spherical roller bearing and a self- cleaning roller 170 mm Ø.

SPS

for tractors from 40 hp

The SPS side mulcher is a light and attractively-priced side mulcher with pro qualities for all mulching tasks. The SPS is designed for power classes to 100 hp.

SSG

for tractors from 23 hp

The SSG series can be attached on the rear on all small tractors/ compact tractors and they are available in left and right versions. Both series offer particularly versatile implementation.

With this mulcher application areas can be worked that cannot be reached with a front mulcher. Thus ditches and embankments are conveniently mulched and mulching under bushes and hedges is a breeze.

On the tractor only a single-acting control device is required.

SSP

for tractors from 40 hp

The SSP side mulchers offer double implementation possibilities: They can be used as rear mulchers directly behind the tractor. With the long parallelogram it is swung to the side next to the tractor to mulch on waysides and roadsides, and for mulching embankments and ditches.

The variable inclination range of 90° upward and 60° downward, as well as the variably adjustable swing ranges enable the greatest possible area of implementation!

STO

for tractors from 45 hp

The STO rotary mulchers are preferred in orchard implementation.

Extremely flat and with a smooth surface it slides through under low-hanging boughs without damaging branches and fruit. However, the outstanding characteristics of the STO also ensure optimal mulching results for green area maintenance and on managed grassland with fruit trees.

As desired, the mulched material is distributed in the tramline behind the implement, or uniformly distributed laterally in the tree strip. The desired distribution can be adjusted on the discharge flaps.

Type A


for tractors from 40 hp

The front flail mulcher Type A is designed that it can be mounted to almost all special tractors.

Apart from the capability with landscape care in municipal use, due to its stability the Type A model offers excellent requirements for mulching in lopes, in agriculture and forestry as well as in fruit-growing and viticulture.

VO

for tractors from 45 hp

VO rotary mulchers have a stable frame construction, designed particularly
for use on powerful tractors and for
the mulch-spray combination.

Within the variable working width adjustment of all VO rotary mulchers any desired position can be freely selected. The working width is variably adjusted from the tractor, hydraulically. Both swing discs can be adjusted synchronously or separately.

Thus the VO rotary mulchers offer an absolutely reliable and economic possibility for mulching the tree strip and implementing organic cultivation. They are built particularly low and have a smooth surface, in order to slide under the fruit-laden boughs.

WM

for tractors from 18 hp

The sturdy WM flail mulchers are fitted with a solid and torsion-free steel sheet housing and a compact design. The slim drive box is ideal for mulching in vinicultureand other cultures in rows.

Thanks to the special mounting system, it is possible to equip the machines with various accessories and fulfill every customisation individually, whether rear mounting, front mounting or rear and front mounting.

The customer can choose between rigid mounting or hydraulic sideshift adjustment. It is also possible to mount special equipment such as mulching heads or rotary tillers. Due to the hinged mounting and shredding device it can be switched easily between mulching and shredding prunings. Just pull the prongs and open the cover. Thus, the WM flail mulcher is very versatile. From wineries up to gardening and landscaping designers or municipal businesses.

WMH

for tractors from 20 hp

The WMH hydraulic mulching head is designed for universal use. It has a compact and low design and, with its hydraulic drive, is particularly well-suited for attachment on all special tractors, wheel loaders, mini-excavators, municipal vehicles and extension mowers.

In addition, a variable attachment system enables easy continued use of the mulcher if there is a vehicle change. Serrated counter-cutters in the housing increase the degree of shredding of the mulch mass and thus achieve optimum working results.